DeWalt D28710 Service Manual download pdf (Page 35)

WARNING: Do not switch the tool on or

off when under load.

WARNING: Do not cut magnesium.

Transporting (ﬁ g. 1)

The tool is equipped with a lock-down chain (t)

which locks the tool in closed-down position for

carrying.

• Lower the guard (o) onto the cutting table (j) and

secure the tool in this position by hooking the

chain (t) over the lock-down hook (q).

• Transport the tool using the carrying handle (d).

• To release the tool, depress the operating handle

MAINTENANCE

Your DEWALT power tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

WARNING: To reduce the risk of

injury, turn unit off and disconnect

machine from power source before

installing and removing accessories,

before adjusting or changing set-ups

or when making repairs. Be sure the

trigger switch is in the OFF position. An

accidental start-up can cause injury.

Lubrication

Your power tool requires no additional lubrication.

Cleaning

WARNING: Blow dirt and dust out of the

main housing with dry air as often as dirt

is seen collecting in and around the air

vents. Wear approved eye protection and

approved dust mask when performing

this procedure.

WARNING: Never use solvents or other

harsh chemicals for cleaning the non-

metallic parts of the tool. These chemicals

may weaken the materials used in these

parts. Use a cloth dampened only with

water and mild soap. Never let any liquid

get inside the tool; never immerse any

part of the tool into a liquid.

Optional Accessories

WARNING: Since accessories, other

than those offered by D

EWALT, have not

been tested with this product, use of

such accessories with this tool could be

hazardous. To reduce the risk of injury,

only DEWALT recommended accessories

should be used with this product.

Consult your dealer for further information on the

appropriate accessories.

Protecting the Environment

Separate collection. This product must not

be disposed of with normal household

waste.

Should you ﬁnd one day that your DEWALT product

needs replacement, or if it is of no further use to you,

do not dispose of it with household waste. Make this

product available for separate collection.

Separate collection of used products and

packaging allows materials to be recycled

and used again. Re-use of recycled

materials helps prevent environmental

pollution and reduces the demand for raw

materials.

Local regulations may provide for separate collection

of electrical products from the household, at municipal

waste sites or by the retailer when you purchase a

new product.

DEWALT provides a facility for the collection and

recycling of DEWALT products once they have

reached the end of their working life. To take

advantage of this service please return your product

to any authorised repair agent who will collect them

on our behalf.

You can check the location of your nearest authorised

repair agent by contacting your local DEWALT office

at the address indicated in this manual. Alternatively, a

list of authorised DEWALT repair agents and full details

of our after-sales service and contacts are available

on the Internet at: www.2helpU.com.

ENGLISH

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 135 136

Comments to this Manuals

No comments

DeWalt D28710 Service Manual Page 35

Comments to this Manuals

Related products and manuals for Power tools DeWalt D28710