DeWalt D28710 Service Manual download pdf (Page 30)

ENGLISH

outdoors, only use extension cables intended for

outdoor use and marked accordingly.

13 Use appropriate tool

The intended use is described in this instruction

manual. Do not force small tools or attachments

to do the job of a heavy-duty tool. The tool will

do the job better and safer at the rate for which it

was intended. Do not force the tool.

Warning! The use of any accessory or attachment

or performance of any operation with this tool

other than those recommended in this instruction

manual may present a risk of personal injury.

14 Check for damaged parts

Before use, carefully check the tool and mains

cable for damage. Check for misalignment and

seizure of moving parts, breakage of parts,

damage to guards and switches and any other

conditions that may affect its operation. Ensure

that the tool will operate properly and perform

its intended function. Do not use the tool if any

part is damaged or defective. Do not use the tool

if the switch does not turn it on and off. Have

any damaged or defective parts replaced by an

authorised D

EWALT repair agent. Never attempt

any repairs yourself.

15 Unplug tool

Switch off and wait for the tool to come to a

complete standstill before leaving it unattended.

Unplug the tool when not in use, before

changing any parts of the tools, accessories or

attachments and before servicing.

16 Avoid unintentional starting

Do not carry the tool with a ﬁ nger on the switch.

Be sure that the tool is switched off before

plugging in.

17 Do not abuse cord

Never carry the tool by its cord. Never pull the

cord to disconnect from the socket. Keep the

cord away from heat, oil and sharp edges.

18 Store idle tools

When not in use, tools must be stored in a dry place

and locked up securely, out of reach of children.

19 Maintain tools with care

Keep the tools in good condition and clean

for better and safer performance. Follow the

instructions for maintenance and changing

accessories. Keep all handles and switches dry,

clean and free from oil and grease.

20 Repairs

This tool is in accordance with the relevant

safety regulations. Have your tool repaired by an

authorised D

EWALT repair agent. Repairs should

only be carried out by qualiﬁ ed persons using

original spare parts; otherwise this may result in

considerable danger to the user.

Additional Safety Instructions for Chopsaws

• Always wear regular working gloves while

operating this tool.

• Keep hands away from the cutting disc. Never

cut workpieces that require manual action closer

than 15 cm from the rotating cutting disc.

• Do not cut workpieces less than 1.2 mm in

thickness when using the cutting disc supplied

with this tool.

• Do not operate this tool without guards in place.

• Do not perform any operation freehand. Use the

material clamp to clamp the workpiece securely.

• Never reach in the back of the cutting disc.

• Always position the tool on a ﬂ at, stable

surface that is well maintained and free of loose

materials, e.g. chips and cut-offs.

• Before using, inspect the cutting disc for cracks

or ﬂ aws. Discard the cutting disc if a crack or

ﬂ aw is evident or if it is otherwise defective.

• Make sure the cutting disc is not contacting the

workpiece before the tool is switched on.

• In operation, avoid bouncing the cutting disc or

giving it rough treatment. If this occurs, stop the

tool and inspect the cutting disc.

• Do not operate the tool while standing in line with

the cutting disc. Keep other persons away from

the work area.

• Be aware of cutting chips and the material being

cut. They may be sharp and hot. Allow cut off

parts to cool before handling.

• The spark deﬂ ector becomes hot during use.

Avoid touching or adjusting the spark deﬂ ector

immediately after operation.

• Switch off the tool and wait for the cutting disc to

stop before moving the workpiece or changing

the settings.

• After switching off, never attempt to stop the

cutting disc by pressing against the side of the

disc.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 135 136

DeWalt D28710 Service Manual Page 30

Comments to this Manuals

DeWalt D28710 Service Manual Page 30

Comments to this Manuals

Related products and manuals for Power tools DeWalt D28710