DeWalt D28710 Service Manual download pdf (Page 32)

Bore diameter.

DATE CODE POSITION (FIG. 1)

The date code (u), which also includes the year of

manufacture, is printed into the housing.

Example:

2012 XX XX

Year of Manufacture

Package Contents

The package contains:

1 Chopsaw

1 Hex key

1 Instruction manual

• Check for damage to the tool, parts or

accessories which may have occurred during

transport.

• Take the time to thoroughly read and understand

this manual prior to operation.

Description (ﬁ g. 1)

WARNING: Never modify the power tool

or any part of it. Damage or personal

injury could result.

a. On/off switch

b. Padlock hole

c. Operating handle

d. Carrying handle

e. Depth stop bolt

f. Lock nut

g. Base

h. Fence

i. Material clamp

j. Cutting table

k. 8 mm hex key

l. Handle

m. Material clamp lever

n. Cutting disc

o. Guard

p. Spindle lock

q. Lock-down hook

r. Spark deflector

s. Spark deflector screw

t. Lock-down chain

u. Date code

INTENDED USE

Your D28710 chop saw has been designed for the

cutting of variously shaped steel materials.

DO NOT use under wet conditions or in presence of

flammable liquids or gases.

The D28710 chop saw is a professional power tool.

DO NOT let children come into contact with the tool.

Supervision is required when inexperienced operators

use this tool.

• This product is not intended for use by persons

(including children) suffering from diminished

physical, sensory or mental abilities; lack of

experience, knowledge or skills unless they are

supervised by a person responsible for their

safety. Children should never be left alone with

this product.

Electrical Safety

The electric motor has been designed for one

voltage only. Always check that the power supply

corresponds to the voltage on the rating plate.

Your DEWALT tool is double insulated in

accordance with EN 61029; therefore no

earth wire is required.

WARNING: 115 V units have to

be operated via a fail-safe isolating

transformer with an earth screen between

the primary and secondary winding.

If the supply cord is damaged, it must be replaced

by a specially prepared cord available through the

EWALT service organisation.

Mains Plug Replacement

(U.K. & Ireland Only)

If a new mains plug needs to be fitted:

• Safely dispose of the old plug.

• Connect the brown lead to the live terminal in the

plug.

• Connect the blue lead to the neutral terminal.

WARNING: No connection is to be made

to the earth terminal.

Follow the fitting instructions supplied with good

quality plugs. Recommended fuse: 13 A.

Using an Extension Cable

If an extension cable is required, use an approved

3–core extension cable suitable for the power input

of this tool (see Technical Data).The minimum

conductor size is 1.5 mm

; the maximum length

is 30 m.

ENGLISH

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 135 136

Comments to this Manuals

No comments

DeWalt D28710 Service Manual Page 32

Comments to this Manuals

Related products and manuals for Power tools DeWalt D28710