DeWalt DCD776 Service Manual Page 35

  • Download
  • Add to my manuals
  • Print
  • Page
    / 192
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 34
ENGLISH
33
Battery pack DCB140 DCB141 DCB142 DCB143 DCB145
Battery type Li-Ion Li-Ion Li-Ion Li-Ion Li-Ion
Voltage V
DC
14.4 14.4 14.4 14.4 14.4
Capacity A
h
3.0 1.5 4.0 2.0 1.3
Weight kg 0.53 0.30 0.54 0.30 0.30
Battery pack DCB180 DCB181 DCB182 DCB183 DCB185
Battery type Li-Ion Li-Ion Li-Ion Li-Ion Li-Ion
Voltage V
DC
18 18 18 18 18
Capacity A
h
3.0 1.5 4.0 2.0 1.3
Weight kg 0.64 0.35 0.61 0.40 0.35
Chargers DCB106 / DCB107
Mains voltage V
AC
230 V
Battery type Li-Ion
Approx. charging time min 60 70 90 140 180
(1.3 Ah battery (1.5 Ah battery (2.0 Ah battery (3.0 Ah battery (4.0 Ah battery
packs) packs) packs) packs) packs)
Weight kg 0.49
Fuses
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 3 Amperes, in plugs
Definitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
DRILL/DRIVER/HAMMERDRILL
DCD734, DCD771, DCD776
DEWALT declares that these products described
under Technical Data are in compliance with:
2006/42/EC, EN 60745-1, EN 60745-2-1,
EN 60745-2-2.
These products also comply with Directive
2004/108/EC and 2011/65/EU. For more
information, please contact DEWALT at the following
address or refer to the back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
D
EWALT.
Horst Grossmann
Vice President Engineering
D
EWALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
15.01.2014
Page view 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 191 192

Comments to this Manuals

No comments