DeWalt DCD776 Service Manual download pdf (Page 41)

ENGLISH

Package Contents

The package contains:

1 Drill/driver or 1 drill/driver/hammerdrill

1 Charger

1 Li-Ion battery pack (C1 model)

2 Li-Ion battery packs (C2 model)

3 Li-Ion battery packs (C3 model)

1 Kitbox

1 Instruction manual

NOTE: Battery packs, chargers and kitboxes are

not included with N-models.

• Check for damage to the tool, parts or

accessories which may have occurred during

transport.

• Take the time to thoroughly read and

understand this manual prior to operation.

Description (fig. 1)

WARNING: Never modify the power

tool or any part of it. Damage or

personal injury could result.

a. Trigger switch

b. Forward/reverse control button

c. Torque adjustment collar

d. Gear shifter

e. Worklight

f. Keyless chuck

g. Battery pack

h. Battery release button

i. Main handle

INTENDED USE

These drills/drivers/hammerdrills are designed

for professional drilling, percussion drilling and

screwdriving applications.

DO NOT use under wet conditions or in presence of

flammable liquids or gases.

These drills/drivers/hammerdrills are professional

power tools.

DO NOT let children come into contact with the

tool. Supervision is required when inexperienced

operators use this tool.

• This product is not intended for use by persons

(including children) suffering from diminished

physical, sensory or mental abilities; lack of

experience, knowledge or skills unless they are

supervised by a person responsible for their

safety. Children should never be left alone with

this product.

Electrical Safety

The electric motor has been designed for one

voltage only. Always check that the battery pack

voltage corresponds to the voltage on the rating

plate. Also make sure that the voltage of your

charger corresponds to that of your mains.

Your DEWALT charger is double insulated

in accordance with EN 60335; therefore

no earth wire is required.

If the supply cord is damaged, it must be replaced

by a specially prepared cord available through the

DEWALT service organisation.

Mains Plug Replacement

(U.K. & Ireland Only)

If a new mains plug needs to be fitted:

• Safely dispose of the old plug.

• Connect the brown lead to the live terminal in

the plug.

• Connect the blue lead to the neutral terminal.

WARNING: No connection is to be

made to the earth terminal.

Follow the fitting instructions supplied with good

quality plugs. Recommended fuse: 3 A.

Using an Extension Cable

An extension cord should not be used unless

absolutely necessary. Use an approved extension

cable suitable for the power input of your charger

(see Technical Data). The minimum conductor size

is 1 mm

; the maximum length is 30 m.

When using a cable reel, always unwind the cable

completely.

ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of

serious personal injury, turn tool

off and disconnect battery pack

before making any adjustments or

removing/installing attachments or

accessories. An accidental start-up

can cause injury.

WARNING: Use only DEWALT battery

packs and chargers.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 191 192

Comments to this Manuals

No comments

DeWalt DCD776 Service Manual Page 41

Comments to this Manuals

Related products and manuals for Power drills DeWalt DCD776