DeWalt D25901 Instruction Manual download pdf (Page 30)

English

WARNING: Apply a pressure of approx. 44–66 lbs. (20–30 kg.) to

the tool. Excessive force does not speed up chiselling but decreases

tool performance and may shorten tool life.

Switching On and Off (Fig. 1)

To turn the tool on, set the on/off switch (A) to position 1. To turn the

tool off, set the on/off switch (A) to position 0.

Demolition, Chasing and Channelling

(Fig. 1)

WARNING: Ensure that the cutting edge does not show

discoloration caused by too much pressure. This may impair the

hardness of the accessory.

Various types of chisels are available as an option.

1. Select the appropriate chisel. Clean and grease its shank.

2. Insert the chisel and check whether it is properly locked.

3. Set the desired impact energy level.

4. Fit and adjust the side handle (F) and make sure it is firmly

tightened.

5. Hold the tool at both handles (B, F) and switch on. The tool now

runs in continuous operation.

6. Always switch off the tool when work is finished and before

unplugging.

MAINTENANCE

WARNING: To reduce the risk of injury, turn unit off and

disconnect tool from power source before installing and

removing accessories, before making any adjustments or

removing/installing attachments or accessories. An accidental

start-up can cause injury.

Your D

EWALT power tool has been designed to operate over a

long period of time with a minimum of maintenance. Continuous

satisfactory operation depends upon proper tool care and regular

cleaning.

Lubrication

Your power tool requires no additional lubrication.

Cleaning

WARNING: Blow dirt and dust out of the main housing with dry air

as often as dirt is seen collecting in and around the air vents. Wear

approved eye protection and approved dust mask when performing

this procedure.

WARNING: Never use solvents or other harsh chemicals for

cleaning the non-metallic parts of the tool. These chemicals may

weaken the materials used in these parts. Use a cloth dampened only

with water and mild soap. Never let any liquid get inside the tool;

never immerse any part of the tool into a liquid.

Repairs

To assure product SAFETY and RELIABILITY, repairs, maintenance

and adjustment (including brush inspection and replacement) should

be performed by authorized service centers or other qualified service

personnel, always using identical replacement parts.

Accessories

WARNING: Since accessories, other than those offered by

EWALT, have not been tested with this product, use of such

accessories with this tool could be hazardous. To reduce the risk of

injury, only D

EWALT, recommended accessories should be used with

this product.

Recommended accessories for use with your tool are available at extra

cost from your local dealer or authorized service center.

These chisels can be reground only a limited number of times.

Contact your dealer for recommendations.

1 2 ... 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments

DeWalt D25901 Instruction Manual Page 30

Comments to this Manuals

Related products and manuals for Power tools DeWalt D25901