DeWalt D25901 Instruction Manual download pdf (Page 29)

English

FIG. 6

Setting the Electronic Impact Energy

Control Dial

D25901 (FIG. 1)

Turn the dial (C) to the desired level. The higher the number, the

greater the impact energy. With dial settings from 1 (low) to 7 (full

power) the tool is extremely versatile and adaptable for many different

applications.

The required setting is a matter of experience, for example:

• when chiselling soft, brittle materials or when minimum break-out

is required, set the dial to 1 or 2 (low);

• when breaking harder materials, set the dial to 7 (full power).

Fitting and Adjusting the Side Handle

(Fig. 7)

The side handle (F) can be mounted on the front of the machine to

suit both right- and left-hand users.

WARNING: Always operate the machine with the side handle

properly mounted.

1. Unscrew the side handle clamp knob (J).

2. Slide the side handle assembly onto the machine locating the

steel ring (I) in the mounting area (X). The correct position of the

side handle is between head and middle of the tube.

3. Adjust the side handle (F) to the desired angle.

4. Slide and rotate the side handle to the desired position.

5. Lock the side handle in place by securely tightening the clamp

knob (J).

FIG. 7

OPERATION

WARNING: Always observe the safety instructions and applicable

regulations.

WARNING: To reduce the risk of injury, turn unit off and

disconnect tool from power source before installing and

removing accessories, before making any adjustments or

removing/installing attachments or accessories. An accidental

start-up can cause injury.

WARNING: Be aware of the location of pipework and wiring.

1 2 ... 24 25 26 27 28 29 30 31 32

No comments

DeWalt D25901 Instruction Manual Page 29