DeWalt DW325PL Use and Care Manual download pdf (Page 8)



MODEL DW325PT DW325PL

HEIGHT 12.5" (305 mm) 12.5" (305 mm)

WIDTH 4.75" (121 mm) 4.75" (121 mm)

LENGTH 17.5" (444 mm) 17.5" (444 mm)

WEIGHT 7.6 lb (3.45 kg) 7.6 lb (3.45 kg)

MAGAZINE ANGLE 30° 21°

RECOMMENDED

OPERATING PRESSURE

70 - 120 psig 70 - 120 psig

AIR CONSUMPTION PER

100 CYCLES

7.5 cfm @ 80 psi 7.5 cfm @ 80 psi

LOADING CAPACITY

Up to 92 Nails Up to 64 Nails



MODEL DW325PT DW325PL

NAIL LENGTHS 2" - 3-1/4"

(50 mm - 83 mm)

2" - 3-1/4"

(50 mm - 83 mm)

SHANK DIAMETERS .113" - .131"

(2.8 mm - 3.3 mm)

.113" - .148"

(2.8 mm - 3.7 mm)

FASTENER COLLATION 30° - 34°

Paper tape

21° Plastic

collated

NAIL TYPE 30° clipped head/

30° full head

21° round head





WARNING: Read the section titled Important Safety Instructions

at the beginning of this manual. Always wear eye and ear protection

when operating this tool. Keep the nailer pointed away from yourself

and others. For safe operation, complete the following procedures

and checks before each use of the nailer.

1. Before you use the nailer, be sure that the compressor tanks

have been properly drained.

2. Lubricate the tool following these directions:

a. Use D

WALT pneumatic tool oil or a non-detergent S.A.E. 20

weight oil. DO NOT use detergent oil or additives as they will

damage o-rings and rubber parts.

b. Use a filter-regulator-lubricator in the air line between the

compressor and the tool when possible.

c. If a lubricator is not available, add 5 to 10 drops of oil in the air

fittingaleasttwiceadayorevery4hoursofuse.

FIG. 2

FIG. 3

English

9R208191_DW325PL_DW325PT_DEWALT, FRAMING NAILER(LPF).indd 6 11/14/14 3:06 PM

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 47 48

Comments to this Manuals

No comments

DeWalt DW325PL Use and Care Manual Page 8

Comments to this Manuals

Related products and manuals for Nail Gun DeWalt DW325PL