DeWalt DW325PL Use and Care Manual download pdf (Page 4)

• Only use air hose that is rated for a maximum working

pressure of at least 150 PSI (10.3 BAR) or 150% of the

maximumsystempressure,whicheverisgreater. (Fig. D)

• Donotusebottledgasestopowerthis

FIG. E

FIG. F

FIG. G

tool. Bottled compressed gases such as

oxygen, carbon dioxide, nitrogen,

hydrogen, propane, acetylene or air are

not for use with pneumatic tools. Never

use combustible gases or any other

reactive gas as a power source for this tool.

Danger of explosion and/or serious

personal injury may result. (Fig. E)

• Usecouplingsthatrelieveallpressure

from the tool when it is disconnected

from the power supply. Use hose

connectors that shut off air supply from

compressor when the tool is disconnected.

(Fig. F)

• Disconnecttoolfromairsupplywhen

not in use. Always disconnect tool

from air supply and remove fasteners

from magazine before leaving the

area or passing the tool to another

operator. Do not carry tool to another

workareainwhichchanginglocation

involves the use of scaffoldings, stairs,

ladders, and the like, with air supply

connected.Donotmakeadjustments,

remove magazine, perform maintenance or clear jammed

fasteners while connected to the air supply. If the contact trip is

adjusted when the tool is connected to the air supply and nails are

loaded, accidental discharge may occur. (Fig. G)

• Connect tool to air supply before loading fasteners, to

prevent a fastener from being fired during connection. The

tool driving mechanism may cycle when tool is connected to

the air supply. Do not load fasteners with trigger or contact trip

depressed, to prevent unintentional firing of a fastener.

• Do not remove, tamper with, or

FIG. H

FIG. I

FIG. J

otherwise cause the tool, trigger, or

contact trip to become inoperable.

Do not tape or tie trigger or contact trip in

the on position. Do not remove spring

from contact trip. Make daily inspections

for free movement of trigger and contact

trip. Uncontrolled discharge could result.

• Inspect tool before use. Do not

operate a tool if any portion of the tool,

trigger, or contact trip is inoperable,

disconnected,altered,ornotworking

properly. Leaking air, damaged parts

or missing parts should be repaired or

replaced before use. (Fig.H)

• Donotalterormodifythetoolinany

way. (Fig. I)

• Alwaysassumethatthetoolcontains

fasteners.

• Do not point the tool at co-workers

or yourself at any time. No horseplay!

Work safe! Respect the tool as a working

implement. (Fig. J)

English

9R208191_DW325PL_DW325PT_DEWALT, FRAMING NAILER(LPF).indd 2 11/14/14 3:06 PM

1 2 3 4 5 ... 48

Comments to this Manuals

No comments

DeWalt DW325PL Use and Care Manual Page 4

Comments to this Manuals

Related products and manuals for Nail Gun DeWalt DW325PL