DeWalt DW325PL Use and Care Manual Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 48
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
• Keephandsand bodypartsclearof
FIG. Q
Fig. R
FIG. S
immediateworkarea. Hold workpiece
with clamps when necessary to keep
hands and body out of potential harm. Be
sure the workpiece is properly secured
before pressing the nailer against the
material. The contact trip may cause the
work material to shift unexpectedly.
(Fig.Q)
• Do not use tool in the presence of
flammable dust, gases or fumes. The
tool may produce a spark that could
ignite gases causing a fire. Driving a nail
into another nail may also cause a spark.
(Fig.R)
• Keepfaceandbodypartsawayfrom
back of the tool cap when working
in restricted areas. Sudden recoil can
result in impact to the body, especially
when nailing into hard or dense material.
(Fig. S)
• Grip tool firmly to maintain control
while allowing tool to recoil away
from work surface as fastener is
driven. In “Contact Actuation Mode” if
contact trip is allowed to recontact work
surface before trigger is released an
unwanted fastener will be fired.
• Choice of triggering method is
important. Check the manual for triggering options.
CONTACT ACTION TRIGGER
• Whenusingthecontactactiontrigger,
FIG. T
be careful of unin tentional double
fires resulting from tool recoil.
Unwanted fasteners may be driven if
the contact trip is allowed to accidentally
re-contact the work surface. (Fig. T)
TO AVOID DOUBLE FIRES:
• Donotengagethetool againstthe
work surface with a strong force.
• Allowthetooltorecoilfullyaftereachactuation.
• Usesequentialactiontrigger.
• When “contact” actuating the framing nailer, always
keeptoolincontrol. Inaccurate placement of tool can result
in misdirected discharge of a fastener.
SEQUENTIAL ACTION TRIGGER
• Whenusingthesequentialaction
FIG. U
trigger, do not actuate the tool
unless the tool is placed firmly
againsttheworkpiece.
• Donotdrivenails blindly intowalls,
floorsorotherworkareas.Fasteners
driven into live electrical wires, plumbing,
or other types of obstructions can result
in injury. (Fig.U)
• Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use tool while tired or under
the influence of drugs, alcohol, or medication. A moment
of inattention while operating power tools may result in serious
personal injury.
English
4
9R208191_DW325PL_DW325PT_DEWALT, FRAMING NAILER(LPF).indd 4 11/14/14 3:06 PM
Page view 5
1 2 3 4 5 6 7 8 9 10 11 ... 47 48

Comments to this Manuals

No comments