DeWalt D28710 Instruction Manual Page 10
- Page / 43
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
CRADLE MOUNTING
(FIG. 10)
1. Cut two boards
approximately 20" long x
2" high x 4" wide (508 x
50.8 x 101.6mm).
2. Place the chop saw at
desired work location.
3. Place boards tightly
alongside and nail to work
surface.
Operation
Tips for More
Accurate Cuts
FIG. 10
• Allow the wheel to do the cutting. Excessive force will cause
the wheel to glaze reducing cutting efficiency and/or to deflect
causing inaccurate cuts.
• Properly adjust fence angle.
• Make sure material is laying flat across base.
• Properly clamp material to avoid movement and vibration.
MAINTENANCE
Motor Brush Inspection and Replacement
(Fig. 11)
_WARNING: Turn off and unplug the tool before making
any adjustments or removing or installing attachments or
accessories. Be sure the trigger switch is in the OFF position.
FIG. 11 W
S 12I
(6mm)
Brushes should be regularly inspected for wear. To inspect brushes,
remove brush cap (W). Brushes (X) should slide freely in brush box.
If brushes are worn down to .2" (6mm) as shown in Figure 10 they
should be replaced. To reinstall, push new brush back into brush
box. If replacing existing brush, maintain same orientation as when
removed. Replace the brush cap (do not overtighten).
Cleaning
A WARNING: Blow dirt and dust out of all air vents with clean, dry air
at least once a week. To minimize the risk of eye injury, always wear
ANSI Z87.1 approved eye protection when performing this.
_WARNING: Never use solvents or other harsh chemicals for
cleaning the non-metallic parts of the tool These chemicals may
weaken the plastic materials used in these parts. Use a cloth
dampened only with water and mild soap. Never let any liquid get
inside the tool,"never immerse any part of the tool into a liquid.
Repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment should be performed by authorized service centers
or other qualified service organizations, always using identical
replacement parts.
- INSTRUCTION MANUAL 1
- GUIDE D'UTILISATION 1
- MANUAL DE INSTRUCCIONES 1
- Important Safety Instructions 2
- SAVE THESE INSTRUCTIONS 2
- Double Insulation 2
- Polarized Plugs 2
- FEATURES (FIG. 1, 4) 6
- Cutting Capacity 6
- Standard Equipment 7
- Unlocking (Fig. 1) 7
- Fence Operation 8
- Trigger Switch (Fig. 1) 9
- (Fig. 1, 7, 8) 9
- Mounting (Fig. 9, 10) 9
- MAINTENANCE 10
- (Fig. 11) 10
- Cleaning 10
- Lubrication 11
- Accessories 11
- Three Year Limited Warranty 11
- Troubleshooting Guide 12
- CARACTERISTIQUES (FIG. 1, 4) 19
- Alimentation 19
- Equipement standard 20
- D_verrouillage (fig. 1) 20
- Utilisation du guide 21
- Butte de profondeur (fig. 1) 22
- G_chette (Fig. 1) 22
- (fig. 1, 7, 8) 22
- FIG. 11 W 23
- Nettoyage 24
- R_parations 24
- Lubrification 24
- Accessoires 24
- Garantie limit_e de trois ans 24
- Guide de depannage 26
- CONSERVE ESTAS INSTRUCCIONES 28
- Enchufes polarizados 28
- CARACTERiSTICAS (FIG. 1, 4) 31
- Alimentaci6n el_ctrica 31
- Capacidad de corte 33
- Equipo estdndar 33
- Para portar (Fig. 1) 33
- Operacibn del torno (Fig. 4) 34
- Operaci6n de la guia 35
- Tope de profundidad (Fig. 1) 35
- (o,2") 37
- Reparaciones 38
- LubricaciOn 38
- Accesorios 38
- AI_AR,ILLA,,,u__ 40
- 2. Bajovoltaje 41
- 3. Bajovoltajede generador 41
Related products and manuals for Power tools DeWalt D28710
Power tools DeWalt DC300 Instruction Manual
(64 pages)
(64 pages)
Power tools DeWalt DCD945 Service Manual
(20 pages)
(20 pages)
Power tools DeWalt DW733 Instruction Manual
(30 pages)
(30 pages)
Power tools DeWalt 36-485 Instruction Manual
(53 pages)
(53 pages)
Power tools DeWalt DCD710 Service Manual
(16 pages)
(16 pages)
Power tools DeWalt 36-085 Instruction Manual
(19 pages)
(19 pages)
Power tools DeWalt 780 Service Manual
(19 pages)
(19 pages)
Power tools DeWalt DW744 Instruction Manual
(44 pages)
(44 pages)
Power tools DeWalt DW159 User Manual
(8 pages)
(8 pages)
Power tools DeWalt DW746X Service Manual
(128 pages)
(128 pages)
Power tools DeWalt D25941 Service Manual
(15 pages)
(15 pages)
Power tools DeWalt DC820 Service Manual
(25 pages)
(25 pages)
Power tools DeWalt D26414-XE User Manual
(5 pages)
(5 pages)
Power tools DeWalt DW006 Instruction Manual
(37 pages)
(37 pages)
Power tools DeWalt DC547-XE User Manual
(29 pages)
(29 pages)
Power tools DeWalt DW997 Service Manual
(116 pages)
(116 pages)
© 2020, manymanuals.com. All rights reserved. | 2.005 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals