DeWalt D28710 Instruction Manual download pdf (Page 8)

English

BLOCK

FIG. 3

CUT-OFF END

Spark Deﬂ ector Adjustment (Fig. 1)

To best deflect sparks away from surrounding persons and

materials, loosen the screw (B), adjust the spark deflector (C) and

then retighten screw. Do not allow cordset to come into contact with

deflector or sparks as damage to cordset may occur.

FIG. 4

FORWARD

Standard Equipment

1 14" (355mm) metal cutting abrasive wheel

1 Wheel wrench

1 Instruction manual

To Carry (Fig. 1)

Fold down unit to position where you can carry the saw. Use the chain

lock (A) to lock arm down.

Unlocking (Fig. 1)

To unlock tool and raise head, depress motor arm slightly and unlock

the chain lock (A). Motor arm will then pivot upward.

Material Clamping and Supporting

• Angles are best clamped and cut with both legs resting against

base.

• A spacer block slightly narrower than the workpiece can be

used to increase wheel utilization (Fig. 2).

• Long workpieces must be supported by a block so it will be level

with top of base (Fig. 3). The cut-off end should be free to fall

downward to avoid wheel binding.

DIAMETER OF WORKPIECE

SPACER

BLOCK

WIDTH OF SPACER BLOCK

FIG. 2

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 43 44

No comments

DeWalt D28710 Instruction Manual Page 8