DeWalt DW077 Instruction Manual download pdf (Page 16)

English

for use with non-rotating lasers but is compatible with most rotary

red-beam or infra-red (invisible) beam lasers on the market. It can

be set to indicate the location of the beam to either the nearest 1/8”

or the nearest 1/25”. The detector gives both visual signals through

the display window (B) and audio signals through the speaker (E)

to indicate the location of the laser beam.

The D

EWALT digital laser detector can be used with or without the

detector clamp. When used with the clamp, the detector can be

positioned on a grade rod, leveling pole, stud or post.

BATTERIES

The digital laser detector is powered by a 9 volt battery. To install

the battery provided, lift up on the battery compartment cover (F).

Place the 9 volt battery in the compartment, aligning the battery

as shown on the embossed icon (I).

DETECTOR CONTROLS

The detector is controlled by the power/volume button (C) and the

accuracy mode button (D). When the power/volume button is

pushed once, the detector is turned on. The top of the display win-

dow shows the on icon (J), and the volume icon (K). To decrease the

Slightly Slightly

Above Above On Below Below

Grade Grade Grade Grade Grade

fast fast steady slow slow

beep beep tone beep beep

audible

signals

INDICATORS

display icons

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 55 56

No comments

DeWalt DW077 Instruction Manual Page 16