DeWalt DW077 Instruction Manual download pdf (Page 14)

English

CAUTION: Always use a ceiling wire hanger or equivalent mate-

rial, in addition to the wall mount clamp, to help secure the laser

level while mounting it to a wall. Thread the wire through the han-

dle of the laser level. DO NOT thread the wire through the protec-

tive metal cage. Additionally, screws may be used to fasten the wall

mount directly to the wall as a back up. Screw holes (Q) are locat-

ed in the wall mount next to the measuring scales.

4. The tool can be adjusted up and down to the desired offset

height for working. To change the height, loosen the Rack ‘N

Pinion locking knob (R) located on the left of the wall mount.

5. Turn the Rack ‘N Pinion adjustment knob (S) located to the right

of the wall mount to move the laser level up and down to set

your height. Use the wall mount measuring scale to pinpoint

your mark.

NOTE: It may be helpful to turn the power on and turn the rotary

head so that it puts a dot on one of the laser scales. The D

EWALT

target card is marked at 1 1/2", therefore, it may be easiest to set

the offset of the laser to 1 1/2" below the wall angle.

6. Once you have positioned the laser at the desired offset height,

tighten the Rack “N Pinion locking knob to maintain the offset.

7. Using the base leveling knob (T) approximate a level position

from the wall.

Manual Head Rotation

The laser is designed with a protective alloy cage around the rotary

head to prevent accidental damage from work site activities. You

can still access the rotary head and manually direct the beam to

extablish or transfer a mark.

CAUTION: DO NOT attempt to manually rotate the head while

it is spinning. Manual head rotation should only be performed when

the laser is being used in dot mode (0 rpm).

LASER ACCESSORIES

Recommended accessories for use with your tool are available for

purchase at your factory-owned local service center.

CAUTION: The use of any non-recommended accessory may

be hazardous. Use only D

EWALT accessories designed for use

with this product.

If you need any assistance in locating any accessory, please con-

tact D

EWALT Industrial Tool Co., 701

East Joppa Road, Baltimore, MD

21286 or call 1-800-4-D

EWALT. (1-

800-433-9258) See our catalog on

the World Wide Web at www.DEWALT.com.

Laser Enhancement Glasses

The D

EWALT Laser Kit includes a pair of Laser Enhancement

Glasses. These red lens glasses improve the visibility of the laser

beam under bright light conditions or over long distances when the

laser is used for interior applications. These glasses are not

required to operate the laser.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 55 56

Comments to this Manuals

No comments

DeWalt DW077 Instruction Manual Page 14

Comments to this Manuals

Related products and manuals for Laser levels DeWalt DW077