DeWalt DWE402W5 Use and Care Manual download pdf (Page 12)

English

2. While holding the guard release lever open, align the lugs (L) on

the guard with the slots (M) on the gear case.

3. Keeping the guard release lever open, push the guard down until

the guard lugs engage and rotate them in the groove on the gear

case hub. Release the guard release lever.

Mounting Guard

CAUTION: Guards must be used with all grinding wheels,

cutting wheels, sanding flap discs, wire brushes, and wire

wheels. The tool may be used without a guard only when sanding with

conventional sanding discs. A Type 1 guard (intended for use with Type

1 cutting wheels and Type 27 wheels marked for cutting only) is

available at extra cost from your local dealer or authorized service

center. Grinding with wheels other than Type 27 and Type 29 require

different accessory guards not included with the tool. A type 27 guard

is provided for use with a 1/4" (6.35mm) thick Type 27 wheel.

NOTE: Edge grinding and cutting can be performed with Type 27

wheels designed and specified for this purpose; 1/4" (6.35 mm)

thick wheels are designed for surface grinding while thinner Type 27

wheels need to be examined for the manufacturer's label to see if

they can be used for surface grinding or only edge grinding/cutting.

A Type 1 guard must be used for any wheel where surface grinding

is forbidden. Cutting can also be performed by using a Type1 wheel

and a Type 1 guard.

MOUNTING, ADJUSTING AND REMOVING (TYPE 27)

ONE-TOUCH™ GUARD (FIG. 3)

Your grinder is supplied with a keyless ONE TOUCH™ guard.

1. Press the guard release lever (J).

4-1/2" (115 mm) Grinding Wheels

Type 27 guard

unthreaded backing flange

Type 27

depressed center wheel

threaded locking flange

Type 27 guard

Type 27 hubbed wheel

Wire Wheels

Type 27 guard

3" (76.2 mm)

wire cup brush

Type 27 guard

4" (100 mm) wire wheel

Sanding Discs

rubber backing pad

sanding disc

clamp nut

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 71 72

Comments to this Manuals

No comments

DeWalt DWE402W5 Use and Care Manual Page 12

Comments to this Manuals

Related products and manuals for Power tools DeWalt DWE402W5