DeWalt DW341M Service Manual download pdf (Page 9)

9

– Impairment of hearing .

– Risk of personal injury due flying particles.

– Risk of burns due to accessories becoming

hot during operation.

– Risk of personal injury due to prolonged use.

Markings on Tool

The following pictograms are shown on the tool:

Read instruction manual before use.

DATE CODE POSITION (FIG. 1)

The Date Code (o), which also includes the year of

manufacture, is printed into the housing.

Example:

2010 XX XX

Year of Manufacture

Description (ﬁ g. A)

Your jigsaw DW341(K) has been designed for

professional cutting of wood, steel, aluminium,

plastic and ceramic material.

1 On/off switch

2 Lock-on button

3 Speed control dial

4 Sawdust blower

5 Screw

6 Finger guard

7 Blade holder

8 Guide roller

9 Shoe

10 Pendulum stroke selector

Electrical safety

The electric motor has been designed for one

voltage only. Always check that the power supply

corresponds to the voltage on the rating plate.

Your DEWALT tool is double insulated in

accordance with EN 60745; therefore no

earth wire is required.

Using an extension cable

If an extension cable is required, use an approved

extension cable suitable for the power input of

this machine (see technical data). The minimum

conductor size is 1.5 mm

2

. The cable has to have

a rubber jacket and a grounding conductor.

When using a cable reel, always unwind the cable

completely.

Assembly and adjustment

Prior to assembly and adjustment

always unplug the tool.

Fitting and removing a saw blade (fig. B)

The keyed blade exchange system ensures easy

changing of saw blades.

• Release the two fastening screws (5), open

blade holder (7), pull the blade out of the

holder.

• Insert blade into blade holder (7), guiding the

back of the blade into the groove of the guide

roller (8).

• Lock the fastening screws to fix the blade (5)

Setting the bevel angle (fig. C)

The adjustable shoe (9) allows cutting of LH and

RH bevel angles up to 45°. The bevel scale has

preset positions at 0° and 45°.

• Slacken the screws (11) using the supplied

Torx wrench.

• Slide the shoe (9) toward the saw blade.

• Tilt the shoe and set the desired bevel angle

using the scale.

• Tighten the screws.

Setting the pendulum stroke (fig. A)

The adjustable pendulum stroke guarantees

a perfect cutting stroke for different materials.

• Slide the selector (10) to the desired position

referring to the table below. The selector can

be manipulated during operation.

Pos. Wood Metal Plastics

2 Fast cuts - PVC

2 Thick workpieces - Fibreglass

Acrylic

1 Plywood Aluminium -

Chipboard Non-ferrous -

0 Thin workpieces Sheet metal -

Fine cuts

Mounting the plastic anti-scratch shoe cover

(fig. D)

The anti-scratch shoe cover (12) reduces damage

to the surface of (sensitive) workpieces.

• Click the cover onto the shoe as shown.

Instructions for use

• Always observe the safety

instructions and applicable

regulations.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Comments to this Manuals

No comments