DeWalt DW089-XE Instruction Manual download pdf (Page 3)

3 4

IMPORTANT SAFETY INSTRUCTIONS FOR BATTERIES

WARNING: Batteries can explode, or leak, and can cause injury or

fire. To reduce this risk:

 •Carefullyfollowallinstructionsandwarningsonthebatterylabel

and package.

 • Alwaysinsertbatteriescorrectlywithregardtopolarity(+and–),

marked on the battery and the equipment.

 • Donotshortbatteryterminals.

 • Donotchargebatteries.

 • Donotmixoldandnewbatteries.Replaceallofthematthesame

time with new batteries of the same brand and type.

 • Removedeadbatteriesimmediatelyanddisposeofperlocal

codes.

 • Donotdisposeofbatteriesinfire.

 • Keepbatteriesoutofreachofchildren.

 • Removebatteriesifthedevicewillnotbeusedforseveralmonths.

 • Young children and the infirm. This appliance is not intended for

use by young children or infirm persons without supervision.

– This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a

person responsible for their safety.

– Children should be supervised to ensure that they do not play

with the appliance.

Batteries (Fig. 2)

BATTERY TYPE

This laser operates on three LR6 (AA-size) batteries.

INTENDED USE

The crossline laser DW088-XE has been designed to project laser lines

to aid in professional applications. The tool can be used indoor for

horizontal (level), vertical (plumb). The applications range from layout

of walls and windows to installation of framing track.

DO NOT use under wet conditions or in presence of flammable liquids

or gases.

The crossline laser is a professional tool. DO NOT let children come

into contact with the tool. Supervision is required when inexperienced

operators use this tool.SAVE ALL WARNINGS AND

INSTRUCTIONS FOR FUTURE REFERENCE

COMPONENTS (Fig. 1)

WARNING: Never modify the power tool or any part of it. Damage or

personal injury could result.

A. On/off switch (vertical laser beam) G. Horizontal laser beam

indicator

B. On/off switch (horizontal laser beam) H. Pivot bracket

C. Low battery indicator I. Wall mount

D. Vertical laser beam J. Battery compartment cover

E. Horizontal laser beam K. 1/4” x 20 female thread

F. Vertical laser beam indicator

Replacing Batteries (Fig. 2)

The DW088-XE

laser operates on

three LR6 (AA-size)

batteries.

1. Open the battery

compartment

cover (J).

2. Replace the

batteries (L).

Make sure the

new batteries

are placed as

indicated.

3. Close the

battery

compartment

cover.

WARNING: When replacing batteries, always replace the complete

set. Do not mix old batteries with new ones. Preferably use alkaline

batteries.

LOW BATTERY INDICATOR (FIG. 1)

The tool has been equipped with a low battery indicator (C) located

on the control panel. The low battery indicator is lit while the tool

is switched on. It will blink to indicate that the batteries need to be

replaced and the tool will automatically shut down.

Switch off the tool and remove the batteries as soon as the indicator

blinks.

Setting up the Tool (Fig. 3A–3D)

The tool facilitates various set-ups, making it useful for several

applications.

FLOOR SET-UP

Place the tool on a relatively smooth and level surface.

ASSEMBLY AND ADJUSTMENT

WARNING: Do not place the laser in a position which may cause

anyone to intentionally or unintentionally stare into the laser beam.

Serious eye injury may result from staring at the beam.

FIG. 1

FIG. 2

1 2 3 4 5 6 7

Comments to this Manuals

No comments

DeWalt DW089-XE Instruction Manual Page 3

Comments to this Manuals

Related products and manuals for Laser levels DeWalt DW089-XE