DeWalt D25501 Instruction Manual download pdf (Page 33)

English

INTENDED USE

D25501, D25601, D25602

Your rotary hammer has been designed for professional rotary drilling

and chipping applications.

D25820, D25831, D25851

Your chipping hammer has been designed for professional chipping,

chiselling and demolition applications.

DO NOT use under wet conditions or in presence of flammable

liquids or gases.

These hammers are professional power tools. DO NOT let children

come into contact with the tool. Supervision is required when

inexperienced operators use this tool.

ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of injury, turn unit off and

disconnect tool from power source before installing and

removing accessories, before making any adjustments or

removing/installing attachments or accessories. An accidental

start-up can cause injury.

WARNING: Prior to assembly and adjustment, always unplug tool.

Side Handle (Fig. 1)

WARNING: To reduce the risk of personal injury, ALWAYS operate

the tool with the side handle properly installed and securely tightened.

Failure to do so may result in the side handle slipping during tool

operation and subsequent loss of control. Hold tool with both hands

to maximize control.

The side handle clamps to the front barrel (collar) and may be rotated

360° to permit right or left-hand use. For operating convenience, the

side handle can be installed in front or rear positions.

HAMMERDRILLING

MODE

CHIPPING

MODE

CHISEL BIT ADJUSTMENT MODE

FIG. 1

D25602

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 43 44

No comments

DeWalt D25501 Instruction Manual Page 33