DeWalt DW341M Service Manual download pdf (Page 7)

7

EC-Declaration of Conformity

MACHINERY DIRECTIVE

DW341(K)

D

EWALT declares that these products described

under “technical data” are in compliance with:

2006/42/EC, EN 60745-1, EN 60745-2-11.

These products also comply with Directive

2004/108/EC. For more information, please contact

D

EWALT at the following address or refer to the

back of the manual.

The undersigned is responsible for compilation of

the technical file and makes this declaration on

behalf of D

EWALT.

Horst Grossmann

Vice President Engineering and Product

Development

D

EWALT, Richard-Klinger-Straße 11,

D-65510, Idstein, Gemany

31.12.2009

WARNING: To reduce the risk of injury,

read the instruction manual.

The following symbols are used throughout this

manual:

Denotes risk of personal injury, loss

of life or damage to the tool in case of

non-observance of the instructions in

this manual.

Denotes risk of electric shock.

Fire hazard.

Safety instructions

General power tool safety warnings

Warning! Read all safety warnings

and all instructions. Failure to follow

the warnings and instructions listed

below may result in electric shock, fire

and/or serious injury.

Save all warnings and instructions for future

reference. The term “power tool” in all of the

warnings listed below refers to your mains

operated (corded) power tool or battery operated

(cordless) power tool.

1 Work area safety

a Keep work area clean and well lit. Cluttered

or dark areas invite accidents.

b Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power

tools create sparks which may ignite the dust

or fumes.

c Keep children and bystanders away while

operating a power tool. Distractions can

cause you to lose control.

2 Electrical safety

a Power tool plugs must match the outlet.

Never modify the plug in any way. Do

not use any adapter plugs with earthed

(grounded) power tools. Unmodified plugs

and matching outlets will reduce risk of electric

shock.

b Avoid body contact with earthed or

grounded surfaces such as pipes,

radiators, ranges and refrigerators. There is

an increased risk of electric shock if your body

is earthed or grounded.

c Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

d Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the

power tool. Keep cord away from heat, oil,

sharp edges or moving parts. Damaged or

entangled cords increase the risk of electric

shock.

e When operating a power tool outdoors, use

an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces

the risk of electric shock.

3 Personal safety

a Stay alert, watch what you are doing

and use common sense when operating

a power tool. Do not use a power tool

while you are tired or under the influence

of drugs, alcohol or medication. A moment

of inattention while operating power tools may

result in serious personal injury.

b Use safety equipment. Always wear eye

protection. Safety equipment such as dust

mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate

conditions will reduce personal injuries.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Comments to this Manuals

No comments