DeWalt DW089-XE Instruction Manual download pdf (Page 2)

1 2

Definitions: Safety Guidelines

The definitions below describe the level of severity for each

signal word. Please read the manual and pay attention to these

symbols.

DANGER: Indicates an imminently hazardous situation which, if

not avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if

not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if

not avoided, may result in minor or moderate injury.

NOTICE: Indicates a practice not related to personal injury which,

if not avoided, may result in property damage.

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY

DeWALT TOOL, CALL US AT: 1800 444 224 (Aust) or 0800 339 258 (NZ).

Technical Data

DW088-XE

Voltage V 4.5

Battery size 3 x LR6 (AA)

Laser power mW < 1.3

Laser class 2

Wavelength nm 637

Protection class IP54

Self-leveling range ˚ +/- 4

Operating temperature ˚C -10 to +45

Receptacle thread 1/4" x 20 TPI

Weight kg 0.75

SAFETY INSTRUCTIONS

Always observe the safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal injury. Read the

following safety instructions before attempting to operate this product.

Keep these instructions in a safe place.

WARNING: To reduce the risk of injury, user must read the

instruction manual.

WARNING! Read all safety warnings and all instructions Failure

to follow the warnings and instructions may result in electric

shock, fire and/or serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE

REFERENCE.

GENERAL WARNINGS

1. Keep work area clean.

Cluttered areas and benches can cause accidents.

2. Keep children away.

Do not let children come into contact with the tool or extension

cord. Supervision is required for inexperienced users.

3. Use appropriate tool.

The intended use is described in this instruction manual. Do not

force small tools or attachments to do the job of a heavy-duty tool.

The tool will do the job better and safer at the rate for which it was

intended.

WARNING: The use of any accessory or attachment or performance

of any operation with this tool, other than those recommended in this

instruction manual may present a risk of personal injury.

SAFETY INSTRUCTIONS FOR LASERS

WARNING: Read and understand all instructions. Failure to follow

all instructions listed below may result in electric shock, fire and/or

serious personal injury.

 • Do not operate the laser in explosive atmospheres, such as in the

presence of flammable liquids, gases or dust. Power tools create

sparks which may ignite the dust or fumes.

 • Use the laser only with the specifically designated batteries. Use of

any other batteries may create a risk of fire.

 • Store idle laser out of reach of children and other untrained

persons. Lasers are dangerous in the hands of untrained users.

• Use only accessories that are recommended by the manufacturer

for your model. Accessories that may be suitable for one laser,

may create a risk of injury when used on another laser.

 • Tool service must be performed only by qualified repair personnel.

Repairs, service or maintenance performed by unqualified

personnel may result in injury. Contact your local certified service

centre or visit www.dewalt.com.au or www.dewalt.co.nz.

 • Do not use optical tools such as a telescope or transit to view the

laser beam. Serious eye injury could result.

 • Do not place the laser in a position which may cause anyone to

intentionally or unintentionally stare into the laser beam. Serious

eye injury could result.

 • Do not position the laser near a reflective surface which may

reflect the laser beam toward anyone’s eyes. Serious eye injury

could result.

 • Turn the laser off when it is not in use. Leaving the laser on

increases the risk of staring into the laser beam.

 • Do not operate the laser around children or allow children to

operate the laser. Serious eye injury may result.

 • Do not remove or deface warning labels. If labels are removed,

user or others may inadvertently expose themselves to radiation.

 • Position the laser securely on a level surface. Damage to the laser

or serious injury could result if the laser falls.

 • Dress properly. Do not wear loose clothing or jewelry. Contain long

hair. Keep your hair, clothing, and gloves away from moving parts.

Loose clothing, jewelry or long hair can be caught in moving parts.

Air vents often cover moving parts and should also be avoided.

WARNING: Use of controls or adjustments or performance of

procedures other than those specified herein may result in hazardous

radiation exposure.

WARNING: DO NOT DISASSEMBLE THE LASER. There are no

user serviceable parts inside. Disassembling the laser will void all

warranties on the product. Do not modify the product in any way.

Modifying the tool may result in hazardous laser radiation exposure.

WARNING: Fire hazard! Avoid short-circuiting the contacts of a

removed battery.

ADDITIONAL SAFETY INSTRUCTIONS FOR LASERS

 • Thislasercomplieswithclass2accordingtoIEC/EN60825-

1:2007. Do not replace a laser diode with a different type. If

damaged, have the laser repaired by an authorised repair agent.

 • Donotusethelaserforanypurposeotherthanprojectinglaser

lines.

An exposure of the eye to the beam of a class 2 laser is considered

safe for a maximum of 0.25 seconds. Eyelid reflexes will normally

provide adequate protection. At distances over 1 m, the laser complies

with class 1 and thus is considered completely safe.

 • Neverlookintothelaserbeamdirectlyandintentionally.

 • Donotuseopticaltoolstoviewthelaserbeam.

 • Donotsetupthetoolatapositionwherethelaserbeamcan

cross any person at head height.

 • Donotletchildrencomeincontactwiththelaser.

Residual Risks

The following risks are inherent to the use of this device:

– injuries caused by staring into laser beam.

Labels on Tool

The following pictographs are shown on the tool:

Read the instruction manual before use

Laser warning; Do not stare into the laser beam.

1 2 3 4 5 6 7

Comments to this Manuals

No comments

DeWalt DW089-XE Instruction Manual Page 2

Comments to this Manuals

Related products and manuals for Laser levels DeWalt DW089-XE