DeWalt DWV902M Instruction Manual download pdf (Page 4)

• Use this appliance ONLY as described in the manual. Use only D

EWALT

recommended attachments.

• Do not use this appliance with a damaged cord or plug. If the appliance is not

working correctly, or if it has been dropped, damaged, left outdoors, or dropped

in water, return it to a service center.

• Do not pull or carry this appliance by the cord, use the cord as a handle, close a

door on the cord, or pull the cord around sharp edges or corners. Do not run the

appliance over the cord. Keep cord away from heated surfaces.

• Do not unplug this appliance by pulling on the cord. To unplug, grasp the plug,

not the cord.

• Do not handle the plug or appliance with wet hands.

• Do not put any objects into the openings of the appliance. Do not use the

appliance with any opening blocked; keep free of dust, lint, hair and anything else

that may reduce air flow.

• Keep hair, loose clothing, fingers, and all body parts away from the openings and

moving parts.

• Turn off all controls before unplugging appliance.

• Use extra care when cleaning on stairs.

• Do not use the appliance to pick up flammable or combustible liquids, such as

gasoline, or use in areas where flammable or combustible liquids are present.

• Static shocks are possible in dry areas or when the relative humidity of the air is

low. This is only temporary and does not affect the use of the vacuum. To reduce

the frequency of static shocks, add moisture to the air with a console, installed

humidifier or use DWV9316 non-static hose accessory.

• To avoid spontaneous combustion, empty canister after each use.

Electrical Safety

The electric motor has been designed for one voltage range only. Always check

that the power supply corresponds to the voltage on the rating plate. 220–240 V

AC means your appliance will operate on alternating current. Operation at a voltage

outside this range can cause loss of power and can result in overheating. All

DEWALT appliances are factory tested; if this appliance does not operate, check the

power supply. Your DEWALT appliance is double insulated, therefore no earth wire is

required.

• Young children and the infirm. This appliance is not intended for use by young

children or infirm persons without supervision.

– This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety.

– Children should be supervised to ensure that they do not play with the appliance.

• Replacement of the supply cord. If the supply cord or plug is damaged, it must

be replaced by the manufacturer or an authorised DEWALT Service Centre in

order to avoid a hazard.

Grounding Instructions

This appliance must be grounded. If it should malfunction or breakdown, grounding

provides a path of least resistance for electric current to reduce the risk of electric

shock. This appliance is equipped with a cord having an equipment-grounding

conductor and grounding plug. The plug must be inserted into an appropriate outlet

that is properly installed and grounded in accordance with all local codes and

ordinances.

WARNING: Improper connection of the equipment-

GROUNDED

OUTLET

FIG. A

GROUNDING

grounding conductor can result in a risk of electric

shock. Check with a qualified electrician or service

person if you are in doubt as to whether the outlet is

properly grounded. Do not modify the plug provided

with the appliance – if it will not fit the outlet, have a

proper outlet installed by a qualified electrician.

This appliance is for use on a nominal 230-volt circuit

and has a grounding attachment plug that looks like

the plug illustrated in Figure A. Make sure that the

appliance is connected to an outlet having the same

configuration as the plug. No adaptor should be used

with this appliance.

1 2 3 4 5 6 7 8 9 ... 15 16

Comments to this Manuals

No comments

DeWalt DWV902M Instruction Manual Page 4

Comments to this Manuals