DeWalt DWV902M Instruction Manual download pdf (Page 12)

D279059B Dust extraction beater bar kit

TROUBLESHOOTING

PROBLEM SOLUTION

Motor does not run Check power cord, plugs and outlet.

Ensure the on/off /tool control switch is in the ON

position (

Suction capacity decreases Remove blockages in the suction nozzle, suction

tube, suction hose or filters.

Replace the paper or fleece bag.

Check for proper installation of the filters.

Clean or replace the filters.

Empty canister, refer to Empty Canister under

Operation.

Vacuum stops running Thermal overload has been tripped:

1. Turn the vacuum off and disconnect vacuum

cleaner from power source.

2. Empty the canister, if needed.

3. Allow the unit to cool.

4. Plug the power cord into an appropriate outlet

and turn on/off/tool control switch to the ON

position (

) to test. If vacuum will not restart

call 1800 444 224 or (NZ) 0800 339 258.

PROBLEM SOLUTION

Dust comes out while

vacuuming

Check for proper installation of the filters.

Ensure filters are not damaged; replace if necessary.

Ensure filter seals are in place and are secure.

Automatic filter cleaning is

not working

Listen for the solenoid clicking to ensure the filter

cleaning mechanism is working.

Power tool does not turn

on.

Ensure the on/off/tool control switch is in the

ACTIVATION position

1 2 ... 7 8 9 10 11 12 13 14 15 16

No comments

DeWalt DWV902M Instruction Manual Page 12