DeWalt DC900-XE Instruction Manual

DC900-XEHEAVY-DUTY 36V CORDLESS HAMMERDRILLINSTRUCTION MANUAL

8SCREWDRIVING (FIG. 2) 1. Select the desired speed/torque range using the three-speed gear shifter (E) on the top of tool to match the speed and torq

9Side HandleCAUTION: Always operate the tool with the side handle properly assembled. Hold tool with both hands to maximize control. Side

10 2. Drill straight, keeping the bit at a right angle to the work. Do not exert side pres-sure on the bit when drilling as this will cause clogging

1130 DAY NO SATISFACTION GUARANTEEIf you are dissatisfied with any DEWALT power tool, laser or nailer, for any reason, simply return it to the point o

DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286 • 20 Fletcher Road, Mooroolbark, VIC 3138 Australia(JUL06) Form No. 643

1IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DEWALT TOOL, CALL US AT: 1800 654 155 (Aust) or 09 526 2556 (NZ). GENERAL SAFETY INSTRUCTIONS

2f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or

3 • Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unsta

4 • Do not operate charger with damaged cord or plug — have them replaced immediately. • Do not operate charger if it has received a sharp blow, been

5 • Do not incinerate the battery pack even if it is severely damaged or is completely worn out. The battery pack can explode in a fire. Toxic fumes a

6Charger DiagnosticsThis charger is designed to detect certain problems that can arise with the battery packs or the charger. Problems are indicated b

7ABCDFIG. 1KEY FEATURES AND FUNCTIONSVariable Speed Switch (Fig. 1)To turn the tool on, squeeze the trigger switch (A). To turn the tool off, release