DCF880-XE18 V CORDLESS 13 mm (1/2") IMPACT WRENCHDCF885-XE18 V CORDLESS 6.35 mm (1/4") IMPACT DRIVERINSTRUCTION MANUAL
8To install the battery pack (F) into the tool handle, align the battery pack with the rails inside the tool’s handle and slide it into the handle unt
9NOTE: Continuous use in variable speed range is not recommended. It may damage the switch and should be avoided.Forward/Reverse Control Button (Fig.
10 • Larger bolt diameters generally require higher fastening torque. Fastening torque will also vary according to length, grade, and torque coeff
Stanley Black & Decker82 Taryn Drive, Epping, VIC 3076 Australia • 1800 444 224 (Aust) or 0800 339 258 (NZ)www.dewalt.com.au • www.dewalt.co.nz(
1Definitions: Safety Guidelines The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to
2b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or heari
3 • Young children and the infirm. This appliance is not intended for use by young children or infirm persons without supervision. – This applian
4or metal buildings in summer). For best life store battery packs in a cool, dry location. NOTE: Do not store the battery packs in a tool with the
5Important Safety Instructions for All Battery ChargersSAVE THESE INSTRUCTIONS: This manual contains important safety and operating instructions for b
6Indicator Light OperationPACK CHARGINGPACK CHARGEDxHOT/COLD DELAYPROBLEM PACK OR CHARGERPROBLEM POWERLINECharge Indicators This charger is designed t
7be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug the charger b
Comments to this Manuals