DeWalt DW089-XE Instruction Manual download pdf (Page 9)

6. Adjust the height of the laser so that the center of the beam is aligned with the

nearest mark (D).

7. Mark the center of the beam (E) directly above or below the farthest mark (C).

8. Measure the distance between these two marks (C, E). If the measurement is

greater than the values shown below, the laser must be serviced at an authorized

service center.

Distance Allowable Distance

Between Walls Between Marks

9.0 m (30') 6.0 mm (1/4")

12.0 m (40') 8.0 mm (5/16")

15.0 m (50') 10.0 mm (13/32")

FIG. 7

9 m (30')

STEP 1, 2

STEP 3

STEPS 4, 5

STEP 6 STEP 7

STEP 8

STEP 3

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

DeWalt DW089-XE Instruction Manual Page 9