DeWalt DW367 User Manual download pdf (Page 8)

English

TO INSTALL THE BLADE (FIG. 1–4)

1. Place inner clamp washer (G) on saw spindle with the large flat

surface facing out toward the blade.

2. Retract the lower blade guard (F) and place blade on saw spindle

against the inner clamp washer, making sure that the blade will

rotate in the proper direction (the direction of the rotation arrow

on the saw blade and the teeth must point in the same direction

as the direction of rotation arrow on the saw). Do not assume that

the printing on the blade will always be facing you when properly

installed. When retracting the lower blade guard to install the

blade, check the condition and operation of the lower blade guard

to assure that it is working properly. Make sure it moves freely

and does not touch the blade or any other part, in all angles and

depths of cut.

3. Place outer clamp washer (H) on saw spindle with the large flat

surface against the blade and the wording on the outer clamp

washer facing you.

4. Thread blade clamping screw (E) into saw spindle by hand

(screw has right-hand threads and must be turned clockwise to

tighten).

5. Depress the blade lock (I) while turning the saw spindle with the

blade wrench until the blade lock engages and the blade stops

rotating.

6. Tighten the blade clamping screw firmly with the blade wrench.

NOTE: Never engage the blade lock while saw is running, or engage

in an effort to stop the tool. Never turn the saw on while the blade

lock is engaged. Serious damage to your saw will result.

TO REPLACE THE BLADE

1. To loosen the blade clamping screw (E), depress the blade lock

(I) and turn the saw spindle with the blade wrench until the blade

lock engages and the blade stops rotating. With the blade lock

engaged, turn the blade clamping screw counterclockwise with

SPINDLE

BLADE

FIG. 1

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 55 56

No comments

DeWalt DW367 User Manual Page 8