DeWalt D28499X Use and Care Manual download pdf (Page 11)

English

D284931 7" Type 1 Guard

054339-00 Grinding backing flange

22191-00 Clamp nut

61820-01 Wheel Wrench

445928-01 Soft mount spindle protector

397711-00 Top gear case bumper

ASSEMBLY AND ADJUSTMENTS

Attaching the Side Handle

To install the side handle, thread the handle into one of the five

positions listed below and tighten securely by turning clockwise.

• Two front positions: Forward handle

positions are designed for optimized bal-

ance in surface finishing applications.

• Two rear positions: Rear handle positions

are designed for optimized balance in edge

grinding applications.

• One top position: Top handle position is

designed for edge grinding applications.

NOTE: D28497 includes only three handle

positions.

Rotating the Rear Handle

Turn off and unplug tool before making any adjustments or

removing or installing accessories. Before reconnecting the

tool, depress and release the

trigger switch to ensure that the

tool is off.

1. Unlock the rear handle by

pulling out the Handle Release

Lever (G) as shown.

source. To engage the lock, depress the spin-

dle lock button (C) and rotate the spindle until

you are unable to rotate it further.

CAUTION: Never depress the spindle lock

button while the grinder is running. Never turn

on the grinder while the spindle lock button is

depressed. Damage to your tool or personal

injury may result.

SOFT MOUNT

The grinder is equipped with a soft mount, enabling easy wheel

installation and removal.

Accessories and Attachments

It is important to choose the correct guards, backing pads and

flanges to use with grinder accessories. See the chart on pages

5–7 for information on choosing the correct accessories.

CAUTION: Accessories must be rated for at least the speed

recommended on the tool warning label. Wheels and other acces-

sories running over rated speed can fly apart and cause injury.

Accessory ratings must always be above tool speed as shown on

tool nameplate.

ATTACHMENTS

Attachments designed specifically for this grinder can be

purchased through D

EWALT dealers and DEWALT Factory

Service centers.

D284939 9" Type 27 guard

D284948 9" Type 28 guard

D284937 7" Type 27 guard

D284936 6" Type 11 Flaring cup guard with flange

D284934 4" Type 11 Flaring cup guard with flange

D284933 Type 11 Flaring cup wheel backing flange

D284932 Type 1 Flange set

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 58 59

Comments to this Manuals

No comments

DeWalt D28499X Use and Care Manual Page 11

Comments to this Manuals

Related products and manuals for Power tools DeWalt D28499X