DeWalt N005044 Instruction Manual download pdf (Page 10)

ThisengineisonlyforuseinDEWALTapprovedapplications.If

usedinunapproved applications, DEWALT is not responsible for

repairs or damage and the warranty if void. Call 1-800-4-DEWALT

(1-800-433-9258) for more information.

Maintenance Chart

PROCEDURE -._ _ _$ _" _ =r o =r =-

Clean air liiter (3) X

Check oil level X

Change oil (1,2,3) X

Clean spark plug X

Clean engine's exlefior X

Check and adjust valve clearance

(.15 mm intake, .2 mm exhaust) (2)

Clean spark X

arrestor (it equipped)

Clean debris screen (if equipped) I X

1. The engine oil must be changed alter the first 20 hours of

operation. Thereafter change oil every 150 hours of operation

or monthly, whichever comes first.

2. See DEWALT shop manual for detail instruclions. To order a shop

manual call t -800--4-DEWALT.

3. Perform more frequently industy or humid condi!ions

Clteaning Air Fi_ter ERernent (Fig. t )

AWARNING: Hot surfaces. Risk of burn. Engine and surrounding

parts are very hot, do not touch (see the Hot Surfaces identified in

Figure 1). Allow engine to coo! prior to servicing.

A dirty air cleaner will restrict airflow to the carburetor. To prevent

carburetor malfunction, service the air filter regularly. Service more

frequenlfy when operating the engine in extremely dusty areas.

,&WARNING: Using gasoline or flammable solvent to clean the filter

element can cause a fire or explosion.

A WARNING: Risk of fire. Do not operate without air filter.

TO CLEAN THE ELEMENTS

DW16BF-2E, DW177F-E, DWI68F-2H, DW177F-H

1. Remove the wing nut (Y) y ,_ y

and the air filter

cover (X).

2. Remove the second wing _ y

nut (Y) and remove the _._.4,

filler (Z). _.t_A A

3. Remove the foam-type *'_:;'_

pre-filter (AA) from lhe Z

filler (Z).

4. Inspect foam and paper

elements. Replace them if damaged.

TO CLEAN THE ELEMENTS

Foam element: Wash element in warm, soapy water.Then saturate

it in clean engine oil. Squeeze the element to remove excess oil.

Paper element: Clean element by tapping gently to remove dust.

Use compressed air to blow off dust.

A WARNING: When using compressed air, user always must wear

eye protection that conforms to ANSI Z87. t. (CAN/CSA Z94.3).

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 59 60

Comments to this Manuals

No comments

DeWalt N005044 Instruction Manual Page 10

Comments to this Manuals

Related products and manuals for Environment thermometers DeWalt N005044