DeWalt DC011 Instruction Manual download pdf

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DEWALT TOOL,

CALL US TOLL FREE AT:

1-800-4-DEWALT (1-800-433-9258)

DC011 Heavy Duty Work Site Radio/Charger

The DC011 Heavy Duty Work Site Radio/Charger is a combination AM/FM radio and DEWALT

charger. The DC011 will charge most D

EWALT 7.2 to 18.0 volt batteries except for Univolt

batteries. Batteries sold separately.

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves or other appa-

ratus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and a

third grounding prong. The wide blade or the third prong are provided for your safety. If the

provided plug does not fit into your outlet, consult an electrician for replacement of the

obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the man-

ufacturer, or sold with the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long peri-

ods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped.

15. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,

such as vases, shall be placed on the apparatus

The lightning flash with arrow head within a triangle is intended to tell the user that parts

inside the product are a risk of electric shock to persons.

The exclamation point within a triangle is intended to tell the user that important operating

and servicing instructions are in the papers with the appliance.

The double insulation symbol (a square within a square) is intended to alert qualified service

personnel to use only identical replacement parts in this apparatus.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain

or moisture.

CAUTION: To prevent electric shock, match wide blade of plug to wide slot fully insert.

• The label on your radio/charger may include the following symbols.

V..................volts A ..............amperes

Hz................hertz W ..............watts

min ..............minutes ............alternating current (AC)

............direct current (DC)

................fahrenheit Temp.

................

Class II Construction C................celsius Temp.

................earthing terminal

..............safety alert symbol

................shock hazard symbol

Important Safety Instructions for Battery Packs

The DC011 will charge 7.2 volt–18 Volt DEWALT Battery Packs and will play using 7.2–18 Volt

EWALT Battery Packs. When ordering replacement battery packs, be sure to include catalog

number and voltage. Extended Run-Time battery packs deliver more run-time than standard

battery packs. Consult the chart in this manual for compatibility of chargers and battery packs.

NOTE: Your tool will accept either standard or Extended Run Time battery packs. However, be

sure to select proper voltage.

The battery pack is not fully charged out of the carton. Before using the battery pack and

radio/charger, read the safety instructions below. Then follow charging procedures outlined.

READ ALL INSTRUCTIONS

• Do not incinerate the battery pack even if it is severely damaged or is completely worn

out. The battery pack can explode in a fire.

• A small leakage of liquid from the battery pack cells may occur under extreme usage

or temperature conditions. This does not indicate a failure. However, if the outer seal is

broken and this leakage gets on your skin:

a. Wash quickly with soap and water.

b. Neutralize with a mild acid such as lemon juice or vinegar.

c. If battery liquid gets into your eyes, flush them with clean water for a minimum of 10

minutes and seek immediate medical attention. (Medical note: The liquid is 25-35%

solution of potassium hydroxide.)

• Charge the battery packs only in DEWALT chargers.

•

DO NOT splash or immerse in water or other liquids.

• Do not store or use the tool and battery pack in locations where the temperature may

reach or exceed 105°F (such as outside sheds or metal buildings in summer).

DANGER: Never attempt to open the battery pack for any reason. If battery pack case is

cracked or damaged, do not insert into charger. Electric shock or electrocution may result.

Damaged battery packs should be returned to service center for recycling.

NOTE: Battery storage and carrying caps are provided for use whenever the battery

is out of the tool or charger. Remove cap before placing battery in charger or tool.

WARNING: Do not store or carry battery so that metal objects can contact

exposed battery terminals. For example, do not place battery in aprons, pockets,

tool boxes, product kit boxes, drawers, etc., with loose nails, screws, keys, etc.

without battery cap. Transporting batteries can possibly cause fires if the

battery terminals inadvertently come in contact with conductive materials such as keys,

coins, hand tools and the like. The US Department of Transportation Hazardous Material

Regulations (HMR) actually prohibit transporting batteries in commerce or on airplanes (i.e.,

packed in suitcases and carry-on luggage) UNLESS they are properly protected from short

circuits. So when transporting individual batteries, make sure that the battery terminals are

protected and well insulated from materials that could contact them and cause a short circuit.

The RBRC™ Seal

The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on the nickel-

cadmium battery (or battery pack) indicates that the costs to recycle the battery (or

battery pack) at the end of its useful life have already been paid by D

EWALT. In

some areas, it is illegal to place spent nickel-cadmium batteries in the trash or

municipal solid waste stream and the RBRC program provides an environmentally

conscious alternative.

RBRC in cooperation with D

EWALT and other battery users, has established programs in the

United States to facilitate the collection of spent nickel-cadmium batteries. Help protect our envi-

ronment and conserve natural resources by returning the spent nickel-cadmium battery to an

authorized D

EWALT service center or to your local retailer for recycling. You may also contact

your local recycling center for information on where to drop off the spent battery.

RBRC™ is a registered trademark of the

Rechargeable Battery Recycling Corporation.

Important Safety Instructions for Battery Charging

SAVE THESE INSTRUCTIONS: This manual contains important safety instructions for

EWALT battery chargers.

• Before using battery charger, read all instructions and cautionary markings on battery

charger, battery and product using battery.

DANGER: 120 volts are present at charging terminals. Do not probe with conductive objects.

Electric shock or electrocution may result.

WARNING: Do not allow any liquid to get inside radio/charger. Electric shock may result.

CAUTION: To reduce the risk of injury, charge only D

EWALT rechargeable batteries. Other

types of batteries may burst causing personal injury and damage.

CAUTION: Under certain conditions, with the radio/charger plugged in to the power supply,

the exposed charging contacts inside the charger can be shorted by foreign material. Foreign

materials of a conductive nature such as, but not limited to, steel wool, aluminum foil, or any

buildup of metallic particles should be kept away from charger cavities. Always unplug the charg-

er from the power supply when there is no battery pack in the cavity. Unplug radio/charger before

attempting to clean.

• DO NOT attempt to charge the battery pack with any chargers other than the ones in this

manual. The radio/charger and battery pack are specifically designed to work together.

• These radio/chargers are not intended for any uses other than charging D

EWALT

rechargeable batteries. Any other uses may result in risk of fire, electric shock or

electrocution.

• Do not expose radio/charger to rain or snow.

• Pull by plug rather than cord when disconnecting radio/charger. This will reduce risk of

damage to electric plug and cord.

• Make sure cord is located so that it will not be stepped on, tripped over, or otherwise

subjected to damage or stress.

• Do not use an extension cord unless it is absolutely necessary. Use of an improper

extension cord could result in risk of fire, electric shock, or electrocution.

• An extension cord must have adequate wire size (AWG or American Wire Gauge) for

safety. The smaller the gauge number of the wire, the greater the capacity of the cable, that is

16 gauge has more capacity than 18 gauge. When using more than one extension to make up

the total length, be sure each individual extension contains at least the minimum wire size.

Recommended Minimum Wire Size for Extension Cords

Total Length of Cord

25 ft. 50 ft. 75 ft. 100 ft. 125 ft. 150 ft. 175 ft.

7.6 m 15.2 m 22.9 m 30.5 m 38.1 m 45.7 m 53.3 m

Wire Size AWG

18 18 16 16 14 14 12

• Do not place any object on top of radio/charger or place the radio/charger on a soft

surface that might block the ventilation slots and result in excessive internal heat. Place

the radio/charger in a position away from any heat source.

• Do not operate radio/charger with a damaged cord or plug — have them replaced

immediately.

• Do not operate the radio/charger if it has received a sharp blow, been dropped, or

otherwise damaged in any way. Take it to an authorized service center.

• Do not disassemble radio/charger. Take it to an authorized service center when service

or repair is required. Incorrect reassembly may result in a risk of electric shock, electrocution

or fire.

• Disconnect the radio/charger from the outlet before attempting any cleaning. This will

reduce the risk of electric shock. Removing the battery pack will not reduce this risk.

• NEVER attempt to connect 2 radio/chargers together.

• This radio/charger is designed to operate on 120 Volts, 60 Hz AC. It also operates on

direct current (DC). Do not use any other voltage.

SAVE THESE INSTRUCTIONS

Radio/Chargers

The DC011 will charge 7.2–18 Volt DEWALT Battery Packs and will play using 7.2–18 Volt

EWALT Battery Packs. Your battery may also be charged in DEWALT 1 Hour Chargers, 15

Minute Chargers or Vehicular 12 volt charger. Be sure to read all safety instructions before using

your charger. Consult the chart in this manual for compatibility of chargers and battery packs.

Charging Procedure (Fig. 1)

DANGER: 120 volts present at charging terminals. Do not probe with conductive objects.

Danger of electric shock or electrocution. Keep battery door closed and latched at all times

1. Plug the radio/charger into an appropriate AC power outlet or generator.

2. Insert the battery pack into the charging receptacle (I). Make sure the pack is fully seated in

the radio/charger, close the rear door and fasten the latch (H).

3. The red light on the front of the radio (J) will blink continuously indicating that the charging

process has started.

4. The completion of charge will be indicated by the red light remaining ON continuously.

5. Charge time for D

EWALT 7.2 volt –18 volt NiCd battery packs is approximately one hour.

Indicator Light Operation

Charge Indicators

The radio/charger is designed to detect certain problems that can arise with battery packs.

Problems are indicated by the red light flashing at a fast rate. If this occurs, re-insert battery pack

into the radio/charger. If the problem persists, try a different battery pack to determine if the

radio/charger is OK. If the new pack charges correctly, then the original pack is defective and

should be returned to a service center or other collection site for recycling. If the new battery pack

elicits the same trouble indication as the original, have the radio/charger tested at an authorized

service center.

HOT/COLD PACK DELAY

The radio/charger has a Hot/Cold Pack Delay feature: when the radio/charger detects a battery

that is hot, it automatically starts a Hot Pack Delay, suspending charging until the battery has

cooled. After the battery has cooled, the radio/charger automatically switches to the Pack

Charging mode. This feature ensures maximum battery life. The red light flashes long, then short

while in the Hot Pack Delay mode.

PROBLEM POWER LINE

The radio/charger has a Problem Power Line indicator. When the radio/charger is used with some

portable power sources such as generators or sources that convert DC to AC, the radio/charger

may temporarily suspend operation, flashing the red light with two fast blinks followed by a

pause. This indicates the power source is out of limits.

LEAVING THE BATTERY PACK IN THE RADIO/CHARGER

The radio/charger and battery pack can be left connected with the red light glowing indefinitely.

The radio/charger will keep the battery pack fresh and fully charged.

INSTRUCTION MANUAL

GUIDE D'UTILISATION

MANUAL DE INSTRUCCIONES

DC011

Heavy Duty Work Site Radio/Charger

Poste radio/chargeur de chantier à service intensif

Radio/cargador para emplazamientos de trabajo pesado

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y

PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE

INSTRUCTIVO ANTES DE USAR EL PRODUCTO.

Questions? See us on the World Wide Web at www.dewalt.com

DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286

The following are trademarks for one or more DEWALT power tools: the yellow and black color scheme; the “D” shaped air

intake grill; the array of pyramids on the handgrip; the kit box configuration; and the array of lozenge-shaped humps on the

surface of the tool.

1 2 3 4 5 6

Summary of Contents

Page 1 - EWALT battery chargers

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DEWALT TOOL,CALL US TOLL FREE AT:1-800-4-DEWALT (1-800-433-9258) DC011 Heavy Duty Work Site Ra

Page 2

NOTE: A battery pack will slowly lose its charge when kept out of the radio/charger. If the bat-tery pack has not been kept on maintenance charge, it

Page 3

• Bien que le poste radio/chargeur soit conçu pour être branché dans une prise c.a. de120 volts et de 60 Hz, il peut aussi être branché dans une prise

Page 4

RÉGLAGE DU BOUTON DE MISE EN MARCHE/VOLUME 1. Pour mettre la radio en marche, tourner le cadran (A) vers la droite jusqu’à ce qu’on entendeun déclic.2

Page 5

4. Se debe recargar la unidad de alimentación cuando deje de producir suficiente potencia entareas que se ejecutaron con facilidad anteriormente. NO C

Page 6 - EWALT S.A. DE C.V

Nombre y domicilio del distribuidor donde se adquirió el producto:___________________________________________________________________________Este prod