DeWalt DW708 Instruction Manual download pdf (Page 7)

ENGLISH

Safety instructions

When using Power Tools, always observe the safety regulations

applicable in your country to reduce the risk of fire, electric shock

and personal injury. Read the following safety instructions before

attempting to operate this product.

Keep these instructions in a safe place!

General

1 Keep work area clean

Cluttered areas and benches can cause accidents.

2 Consider work area environment

Do not expose Power Tools to humidity.

Keep work area well lit.

Do not use Power Tools in the presence of inflammable liquids or gases.

3 Guard against electric shock

Prevent body contact with earthed surfaces (e.g. pipes, radiators,

cookers and refrigerators).

For use under extreme conditions (e.g. high humidity, when metal

swarf is being produced, etc.) electric safety can be improved by

inserting an isolating transformer or a (FI) earth-leakage circuit-breaker.

4 Keep children away

Do not let children come into contact with the tool or extension cord.

Supervision is required for those under 16 years of age.

5 Extension cords for outdoor use

When the tool is used outdoors, always use extension cords intended

for outdoor use and marked accordingly.

6 Store idle tools

When not in use, Power Tools must be stored in a dry place and

locked up securely, out of reach of children.

7 Dress properly

Do not wear loose clothing or jewellery. They can be caught in moving

parts. Preferably wear rubber gloves and non-slip footwear when working

outdoors. Wear protective hair covering to keep long hair out of the way.

8 Wear safety goggles

Also use a face or dust mask in case the operations produce dust or

flying particles.

9 Beware of maximum sound pressure

Take appropriate measures for the protection of hearing if the sound

pressure of 85 dB(A) is exceeded.

10 Secure workpiece

Use clamps or a vice to hold the workpiece. It is safer and it frees both

hands to operate the tool.

11 Do not overreach

Keep proper footing and balance at all times.

12 Avoid unintentional starting

Do not carry the plugged-in tool with a finger on the switch.

Be sure that the switch is released when plugging in.

13 Stay alert

Watch what you are doing. Use common sense.

Do not operate the tool when you are tired.

14 Disconnect tool

Shut off power and wait for the tool to come to a complete standstill

before leaving it unattended. Unplug the tool when not in use,

before servicing or changing accessories.

15 Remove adjusting keys and wrenches

Always check that adjusting keys and wrenches are removed from the

tool before operating the tool.

16 Use appropriate tool

The intended use is laid down in this instruction manual. Do not force

small tools or attachments to do the job of a heavy-duty tool. The tool

will do the job better and safer at the rate for which it was intended.

Warning! The use of any accessory or attachment or performance of

any operation with this tool, other than those recommended in this

instruction manual may present a risk of personal injury.

17 Do not abuse cord

Never carry the tool by its cord or pull it to disconnect from the socket.

Keep the cord away from heat, oil and sharp edges.

18 Maintain tools with care

Keep the tools in good condition and clean for better and safer

performance. Follow the instructions for maintenance and changing

accessories. Inspect the tool cords at regular intervals and,

if damaged, have them repaired by an authorized DEWALT repair

agent. Inspect the extension cords periodically and replace them if

damaged. Keep all controls dry, clean and free from oil and grease.

19 Check for damaged parts

Before using the tool, carefully check it for damage to ensure that it will

operate properly and perform its intended function. Check for

misalignment and seizure of moving parts, breakage of parts and any

other conditions that may affect its operation. Have damaged guards

or other defective parts repaired or replaced as instructed. Do not use

the tool if the switch is defective. Have the switch replaced by an

authorized DEWALT repair agent.

20 Have your tool repaired by an authorized DEWALT repair agent

This Power Tool is in accordance with the relevant safety regulations.

To avoid danger, electric appliances must only be repaired by qualified

technicians.

Additional safety rules for mitre saws

• Make sure that the blade rotates in the correct direction. Keep the

blade sharp. Do not use blades of larger or smaller diameter than

recommended. For the proper blade rating refer to the technical data.

• Make sure all locking knobs and clamp handles are tight before starting

any operation.

• Check periodically that the motor air slots are clean and free of chips.

• Disconnect the machine from the mains before carrying out any

maintenance work or when changing the blade.

• Before using any accessory consult the instruction manual.

The improper use of an accessory can cause damage.

• Allow the motor to reach full speed before cutting.

• Raise the blade from the kerf in the workpiece prior to releasing the switch.

• Do not wedge anything against the fan to hold the motor shaft.

• Never place either hand in the blade area when the saw is connected

to the electrical power source.

• Do not attempt to cut excessively small pieces.

• Never attempt to stop a machine in motion rapidly by jamming a tool or

other means against the blade; serious accidents can be caused

unintentionally in this way.

• Do not use cracked or damaged saw blades.

• Do not use any abrasive discs.

• Do not cut ferrous metals, non-ferrous metals or masonry.

• Never use your saw without the kerf plate.

• The blade guard on your saw will automatically raise when the arm is

brought down; it will lower over the blade when the arm is raised.

The guard can be raised by hand when installing or removing saw

blades or for inspection of the saw. Never raise the blade guard

manually unless the saw is turned OFF.

• The front section of the guard is louvred for visibility while cutting.

Although the louvres dramatically reduce flying debris, there are

openings in the guard and safety glasses should be worn at all times

when viewing through the louvres.

18 en - 2

1 2 3 4 5 6 7 8 9 10 11 12 13

Comments to this Manuals

No comments

DeWalt DW708 Instruction Manual Page 7

Comments to this Manuals

Related products and manuals for Cordless chainsaws DeWalt DW708