D26676-XE PLANERINSTRUCTION MANUAL
8
DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286 • 20 Fletcher Road, Mooroolbark, VIC 3138 Australia(MAY09) Part No. N02805
1IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DEWALT TOOL, CALL US AT: 1800 654 155 (Aust) or 0800 339258 (NZ). SAFETY INSTRUCTIONS FOR POW
2c) Prevent unintentional starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch
3 • Young children and the infirm. This appliance is not intended for use by young children or infirm persons without supervision. Young children shou
4KFIG. 1IDCHGBAKJFEASSEMBLY WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect tool from power source before making
5Adjusting the Depth of Cut (Fig. 2)Turn the planing depth adjustment knob (D).One revolution of the adjustment knob equals a 1.5 mm change in depth.
6Sharpening Blades (Fig. 6) VFIG. 6O 1. Fasten the blade to the sharpening holder (V). Make sure both blade edges are facing the same direction. 2.
7CleaningWARNING: Blow dirt and dust out of all air vents with clean, dry air at least once a week. To minimize the risk of eye injury, always wear AN
Comments to this Manuals