DeWalt DCF680 Instruction Manual

8V Max* Cordless Gyroscopic Electrician's Screwdriver8V Max* Cordless Gyroscopic ScrewdriverDCF680, DCF682DCF681INSTRUCTION MANUAL

Components (Fig. 2)WARNING: Never modify the power tool or any part of it. Damage or personal injury could result. A. Motion control activation trigg

OPERATIONWARNING: To reduce the risk of serious personal injury, turn tool off and remove the battery pack before making any adjustments or removing/i

2. Engage head of fastener with screwdriver accessory on workpiece. Follow instructions for setting initial starting point.3. Rotate your hand to the

FIG. 7MAINTENANCEWARNING: To reduce the risk of serious personal injury, turn tool off and remove the battery pack before making any adjustments or re

wire ring (P) first. Then seat cutter. When seated correctly the cutter should be flush with cone when in forward position.4. Replace set screw. Alig

DEWALT Battery and Charger SystemsChargers/Charge Time (Minutes) – Chargeurs/Durée de charge (Minutes) – Cargadores de baterías/Tiempo de carga (Minut

1) WORK AREA SAFETYa) Keep work area clean and well lit. Cluttered or dark areas invite accidents.b) Do not operate power tools in explosive atmosph

4) POWER TOOL USE AND CAREa) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job bet

• Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body leaves

Important Safety Instructions for All Battery PacksWhen ordering replacement battery packs, be sure to include the catalog number and voltage. Consult

the battery electrolyte is composed of a mixture of liquid organic carbonates and lithium salts.• Contents of opened battery cells may cause respirato

• Make sure that the cord is located so that it will not bestepped on, tripped over or otherwise subjected to damageor stress.• Do not use an extensio

3. The completion of charge will beindicated by the red light remainingON continuously. The pack is fullycharged and may be used at thistime or left i

d. If charging problems persist, take the tool, battery pack andcharger to your local service center.4. The battery pack should be recharged when it