DeWalt DW0246 Instruction Manual download pdf (Page 9)

COMPONENTS(FIG. 2)

ON/OFF button

B. Volume knob

C. Antenna

D. Hang holes

E. Seek/tuner/arrow buttons

F. Mode button

G. Clock button

H. Preset button

I. LCD display

FIG. 2

OPERA

TION

WARNING: To reduce the risk of injury, turn unit off and

disconnect it from power source before installing and removing

accessories, before adjusting or when making repairs.

Installing and Removing the Batter

y Pack

(Fig. 3)

NOTE: For best r

esults, make sure your battery pack is fully charged.

To install the battery pack (J), insert the slide pack or tower stem into

battery receptical until the battery pack is firmly seated. For the stem

pack, be sure that the battery latches are engaged. Refer to Figure3.

To remove battery pack from the radio, firmly pull up or out depending

on the battery type. For the stem pack, press the battery release

buttons before pulling firmly. Insert it into the charger as described in

the charger section of this manual.

FIG. 3

FUEL GAUGE BA

TTERY PACKS (FIG. 4)

Some D

ALT battery packs include a fuel

gauge which consists of three green LED lights

that indicate the level of charge remaining in

the battery pack.

To actuate the fuel gauge, press and hold

the fuel gauge button (K). A combination

of the three green LED lights will illuminate

designating the level of charge left. When the level of charge in the

battery is below the usable limit, the fuel gauge will not illuminate and

the battery will need to be recharged.

NOTE: The fuel gauge is only an indication of the charge left on the

battery pack. It does not indicate unit functionality and is subject to

variation based on product components, temperature and end-user

application.

FIG. 4

1 2 3 4 5 6 7 8 9 10 11 12 13

Comments to this Manuals

No comments

DeWalt DW0246 Instruction Manual Page 9

Comments to this Manuals

Related products and manuals for Cordless chainsaws DeWalt DW0246