DeWalt DW927 User Manual
Browse online or download User Manual for Cordless combi drills DeWalt DW927. DeWalt DW927 User's Manual
- Page / 7
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA
DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES
DE USAR EL PRODUCTO.
DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286
(APR08) Part No. N008775 Copyright © 2002, 2003, 2006, 2008 DEWALT
The following are trademarks for one or more DEWALT power tools: the yellow and black color scheme; the
“D” shaped air intake grill; the array of pyramids on the handgrip; the kit box configuration; and the array of
lozenge-shaped humps on the surface of the tool.
DW927, DW928, DW929, DW959 (Type/Tipo 1, Type/Tipo 2)
Cordless Adjustable Clutch Driver/Drill
Perceuse-tournevis sans fil à embrayage réglable
Taladro/destornillador inalámbrico con embrague ajustable
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-DEWALT • www.dewalt.com
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DEWALT TOOL,
CALL US TOLL FREE AT:
1-800-4-DEWALT (1-800-433-9258)
G
eneral Safety Rules – For All Battery Operated Tools
W
ARNING! Read and understand all instructions.
F
ailure to follow all instructions listed
b
elow may result in electric shock, fire and/or serious personal injury.
SAV
E THESE INSTRUCTIONS
WORK AREA
• K
eep y
our w
ork area c
l
ean and well lit.
Cluttered benches and dar
k areas in
vite accidents
.
•
Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust.
Power tools create sparks which may ignite the dust or
fumes.
•
Keep bystanders, children, and visitors away while operating a power tool. Distractions
can cause y
ou to lose control.
ELECTRICAL SAFETY
• D
o not abu
se the cord. Never use the cord to carry the tool. Keep cord away from heat,
o
il, sharp edg
es or mo
ving par
ts. Replace damaged cords immediately
.
Damaged cords
m
ay create a fire.
•
A
battery operated tool with integral batteries or a separate batter
y pack must be
rec
har
g
ed onl
y with the specified charger for the battery.
A charger that ma
y be suitab
le
for one type of battery may create a risk of fire when used with another battery.
•
U
se battery operated tool onl
y with the specifically designated battery pack.
U
se of any
other batter
ies ma
y create a r
isk of fire
.
PERSONAL SAFETY
• S
tay
alert, watch what you are doing and use common sense when operating a power
t
ool. Do not use tool while tired or under the influence of drugs, alcohol, or medication.
A moment of inattention while oper
ating po
w
er tools ma
y result in ser
i
ous personal injury
,
•
D
ress pro
perly
. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair,
c
lothing, and gloves away from moving parts.
L
oose clothing, jewelry, or long hair can be
caught in mo
ving par
ts
.
Air v
e
nts often cov
er mo
ving par
ts and should also be avoided.
•
Avoid accidental starting. Be sure switch is in the locked or off position before inserting
battery pack.
Carrying tools with your finger on the switch or inserting the battery pack into a
tool with the switch on invites accidents.
•
Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is
left attached to a rotating par
t of the tool ma
y result in personal injur
y.
•
Do not overreach. Keep proper footing and balance at all times. Proper footing and
balance enables better control of the tool in unexpected situations.
•
Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes,
hard hat, or hearing protection must be used for appropriate conditions.
T
OOL USE AND CARE
• Use clamps or other practical way to secure and support the workpiece to a stable
platform.
Holding the work by hand or against your body is unstable and may lead to a loss
of control.
•
Do not force tool. Use the correct tool for your application. The correct tool will do the job
better and safer at the rate for which it is designed.
•
Do not use tool if s
witc
h does not turn it on or off.
A tool that cannot be controlled with the
s
witch is dangerous and m
ust be repaired.
•
Disconnect battery pack from tool or place the switch in the locked or off position
bef
ore making an
y adjustments, changing accessories, or storing the tool.
Such
pre
v
entativ
e safety measures reduce the risk of starting the tool accidentally.
•
Store idle tools out of reac
h of children and other untrained persons.
T
ools are
dangerous in the hands of untr
ained users
.
•
When battery pack is not in use, keep it away from other metal objects like: paper clips,
coins,
keys, nails, screws, or other small metal objects that can make a connection from
one terminal to another
.
Shor
ting the battery terminals together may cause sparks, burns,
or a fire
.
•
Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools,
with shar
p cutting edges are less lik
ely to bind and are easier to control.
•
Check for misalignment or binding of moving parts, breakage of parts, and any other
condition that may affect the tool’s operation. If damaged, have the tool serviced before
using.
Man
y accidents are caused b
y poorly maintained tools.
•
Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool, may create a risk of injury when used on another
tool.
SERVICE
• Tool service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel may result in a risk of injury.
•
When servicing a tool, use only identical replacement parts. Follow instructions in the
Maintenance section of this manual.
Use of unauthorized parts or failure to follow
Maintenance Instructions may create a risk of shock or injury.
Additional Safety Rules
• Hold tool by insulated gripping surfaces when performing an operation where the tool
ma
y contact hid
den wiring.
Contact with a
“liv
e”
wire will also make exposed metal parts of
the tool “live” and shock the operator.
CAUTION: When not in use, place tool on its side on a stable surface where it will not
cause a tripping or falling hazard. Some tools with large battery packs will stand upright on
the battery pac
k b
ut ma
y be easily knoc
ked over.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other con-
struction activities contains chemicals kno
wn to cause cancer
, bir
th def
ects or other reproduc
-
tive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber (CCA).
Your risk from these exposures varies, depending on how often you do this type of work.To reduce
y
our exposure to these chemicals: work in a well ventilated area, and work with approved safety
equipment, such as those dust masks that are specially designed to filter out microscopic
particles.
•
Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and
o
ther construction activities. Wear protective clothing and wash exposed areas with
soap and water.
Allowing dust to get into your mouth, eyes, or lay on the skin may promote
a
bsorption of harmful chemicals.
• The label on your tool may include the following symbols.The symbols and their definitions are
a
s follows:
V ..................volts A ....................amperes
Hz ................hertz W ....................watts
min ..............minutes ..................alternating current
............direct current
n
o....................no load speed
................Class I Construction ....................earthing terminal
....................(grounded) ....................safety alert symbol
.
.................Class II Construction …/min ............revolutions or reciprocation
.
...................(double insulated) ........................per minute
B
PM ............beats per minute
Important Safety Instructions for Battery Packs
Your tool uses a 12.0 volt, 14.4 volt, or an 18 volt DEWALT battery Pack. When ordering
replacement battery packs, be sure to include catalog number and voltage.Extended Run-Time
battery packs deliver more run-time than standard battery packs. Consult the chart at the end
of this manual for compatibility of chargers and battery packs.
NOTE: Your tool will accept either standard or Extended Run Time battery packs. However, be
sure to select proper voltage. Batteries slowly lose their charge when they are not on the
charger, the best place to keep your battery is on the charger at all times.
The battery pack is not fully charged out of the carton. Before using the battery pack and
charger, read the safety instructions below. Then follow charging procedures outlined.
READ ALL INSTRUCTIONS
• Do not incinerate the battery pack even if it is severely damaged or is completely worn
o
ut.
T
he battery pack can explode in a fire.
•
A
small leakage of liquid from the battery pack cells may occur under extreme usage
o
r temperature conditions.
T
his does not indicate a failure.
H
owever, if the outer seal is broken:
a. and the battery liquid gets on your skin, immediately wash with soap and water for
several minutes.
b. and the battery liquid gets into your eyes, flush them with clean water for a minimum of
10 minutes and seek immediate medical attention. (Medical note: The liquid is 25-35%
solution of potassium hydroxide.)
• Charge the battery packs only in D
EWALT chargers.
•
D
ONOT
s
plash or immerse in water or other liquids.
•
Do not store or use the tool and battery pack in locations where the temperature may
r
each or exceed 105°F (40˚) (such as outside sheds or metal buildings in summer).
DANGER:
Electrocution hazard. Never attempt to open the battery pack for any reason. If
battery pack case is cracked or damaged, do not insert into charger. Electric shock or
electrocution may result. Damaged battery packs should be returned to service center for
r
ecycling.
NO
T
E:
Batter
y
stora
ge and carrying caps are pro
vided for use whenever the battery
is out of the tool or charger
. Remove cap before placing battery in charger or tool.
W
ARNING: Fire hazard. Do not store or carry battery so that metal objects
c
an contact exposed battery terminals.
F
or example, do not place battery in
a
prons, pockets, tool boxes, product kit boxes, drawers, etc., with loose nails, screws,
keys, etc. without battery cap.
Transporting batteries can possibly cause fires if
the batter
y
terminals inadv
ertently come in contact with conductive materials such as
keys, coins, hand tools and the like.
The US Department of Transportation Hazardous Material
Regulations (HMR) actually prohibit transporting batteries in commerce or on airplanes (i.e.,
pac
k
ed in suitcases and carr
y
-on luggage) UNLESS they
are properl
y protected from short
circuits
.
So when tr
anspor
ting individual batteries, make sure that the battery terminals are
p
rotected and well insulated from materials that could contact them and cause a short circuit.
CAUTION: Battery pack must be securely attached to tool. If battery pack is detached,
personal injury may result.
The RBRC™ Seal
The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on the nickel
cadmium and nickel metal hydride batteries (or battery packs) indicate that the costs
t
o recycle these batteries (or battery packs) at the end of their useful life have already
b
een paid by D
EW
ALT. In some areas, it is illegal to place spent nickel
c
admium and nick
el metal hydride batteries in the trash or municipal solid waste
stream and the RBRC program provides an environmentally conscious alternative.
RBRC™ in cooperation with D
EWALT and other battery users, has established programs in the
United States and Canada to facilitate the collection of spent nickel cadmium and nickel metal
h
ydr
ide batter
ies
.
H
elp protect our environment and conserve natural resources by returning the
s
pent nick
el cadmium and nic
kel metal hydride batteries to an authorized D
EW
AL
T ser
vice center
o
r to your local retailer for recycling. You may also contact your local recycling center for
i
nformation on where to drop off the spent battery.
RBRC™ is a registered trademark of the Rechargeable Battery Recycling Corporation.
Important Safety Instructions for Battery Chargers
SAVE THESE INSTRUCTIONS: This manual contains important safety instructions for battery
c
hargers.
• Before using charger, read all instructions and cautionary markings on charger, battery pack,
and product using battery pack.
D
ANGER:
E
lectrocution hazard. 120 volts are present at charging terminals. Do not probe with
c
onductive objects
.
WARNING: Shock hazard. Do not allow any liquid to get inside charger.
CA
UTION:
Bur
n hazard.
T
o reduce the r
i
sk of injury
, charge only D
EW
AL
T rechargeab
le
batteries. Other types of batteries may burst causing personal injury and damage.
CAUTION: Under certain conditions, with the charger plugged in to the power supply, the
exposed charging contacts inside the charger can be shorted by foreign material. Foreign
materials of a conductive nature such as, but not limited to, steel wool, aluminum foil, or any
b
uildup of metallic particles should be kept away from charger cavities.Always unplug the charger
from the power supply when there is no battery pack in the cavity. Unplug charger before
attempting to clean.
•
DO NOT attempt to charge the battery pack with any chargers other than the ones in
this manual.
The charger and battery pack are specifically designed to work together.
•
These chargers are not intended for any uses other than charging DEWALT
rec
har
geable batteries.
An
y other uses ma
y result in risk of fire, electric shock or
electrocution.
•
Do not expose charger to rain or snow.
• Pull by plug rather than cord when disconnecting charger. This will reduce risk of damage
to electric plug and cord.
•
Make sure that cord is located so that it will not be stepped on, tripped over, or
otherwise subjected to damage or stress.
• Do not use an e
xtension cor
d unless it is absolutel
y necessar
y
.
Use of improper e
xtension
cord could result in risk of fire, electric shock, or electrocution.
•
An extension cord must have adequate wire size (AWG or American Wire Gauge) for
safety.
The smaller the gauge number of the wire, the greater the capacity of the cable, that
is 16 gauge has more capacity than 18 gauge.When using more than one extension to make
up the total length, be sure each individual extension contains at least the minimum wire size.
Recommended Minimum Wire Size for Extension Cords
Total Length of Cord
25 ft. 50 ft. 75 ft. 100 ft. 125 ft. 150 ft. 175 ft.
7.6 m
15.2 m
22.9 m
30.5 m 38.1 m 45.7 m 53.3 m
Wire Size AWG
18 18 16 16 14 14 12
• Do not place any object on top of charger or place the charger on a soft surface that
might block the ventilation slots and result in excessive internal heat.
Place the charger
in a position away from any heat source.The charger is ventilated through slots in the top and
the bottom of the housing.
•
Do not operate c
har
g
er with dama
g
ed cor
d or plug
— ha
v
e them replaced immediately
.
•
Do not operate charger if it has received a sharp blow, been dropped, or otherwise
damaged in any way.
Take it to an authorized service center.
•
Do not disassemb
le c
harger; take it to an authorized service center when service or
repair is required.
Incorrect reassembly may result in a risk of electric shock, electrocution or
fire.
•
Disconnect the c
harger from the outlet before attempting any cleaning.
This will reduce
the risk of electric shock. Removing the battery pack will not reduce this risk.
•
NEVER attempt to connect 2 chargers together
.
•
The charger is designed to operate on standard household electrical power (120 Volts).
Do not attempt to use it on any other voltage.
This does not apply to the vehicular charger.
Using Automatic Tune-Up™ Mode
The A
utomatic
T
une-Up
™ Mode equalizes or balances the individual cells in the battery pack
allowing it to function at peak capacity. Battery packs should be tuned up weekly or after 10
charge/discharge cycles or whenever the pack no longer delivers the same amount of work. To
use the A
utomatic
T
une-Up
™
, place the batter
y pac
k in the charger and leave it for at least 8
hours.The charger will cycle through the following modes.
1. The red light will blink continuously indicating that the 1-hour charge cycle has started.
2.
When the 1-hour charge cycle is complete
, the light will sta
y on contin
uously and will no longer
blink.This indicates that the pack is fully charged and can be used at this time.
3.
Whene
v
er the pack is left in the charger after the initial 1-hour charge, the charger will begin
the A
utomatic
T
une-Up
™ Mode.This mode continues up to 8 hours or until the individual cells
Summary of Contents
Page 1 - EWALT • www.dewalt.com
INSTRUCTION MANUALGUIDE D'UTILISATIONMANUAL DE INSTRUCCIONESINSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZADE GARANTÍA.ADVERTENCIA: LÉASE
Page 2 - ENGRANAJE DE DOS VELOCIDADES
ChucksWARNING: Burn Hazard. ALWAYS wear gloves when changing bits. Accessible metal partson the tool and bits may get extremely hot during operation.
Page 3
Recommended accessories for use with your tool are available at extra cost from your localservice center. If you need any assistance in locating any a
Page 4
• NE JAMAIS tenter de connecter 2 chargeurs ensemble.•Le chargeur est conçu pour être utilisé sur une prise résidentielle standard de 120 volts. Ne pa
Page 5
Les accessoires recommandés pour cet outil sont vendus séparément au centre de service devotre région. Pour obtenir de l’aide concernant l’achat d’un
Page 6
• No coloque ningún objeto sobre el cargador ni coloque éste sobre una superficieblanda que pueda bloquear las ranuras de ventilación y resultar en un
Page 7 - 120 Volts 12 Volts
MANTENIMIENTOADVERTENCIA: Para reducir el riesgo de lesiones personales graves, apague laherramienta y desconéctela de la fuente de energía antes de r
Related products and manuals for Cordless combi drills DeWalt DW927
(16 pages)
(7 pages)
(116 pages)© 2020, manymanuals.com. All rights reserved. | 0.173 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals